FAULT
POSSIBLE CAUSE
REMOVING
METHODS
Unsatisfactory
washing result.
Water being hard.
(Dirty, hard, etc.)
Adjust the amount of
detergent based on
the instruction of
detergent
manufacturer.
Laundries distributed
in your machine non-
homogenously.
Spread your laundries
in the machine
properly and
homogeneously.
As soon as the
machine is loaded
with water, water
discharges.
The end of water
discharging hose is
too low for the
machine.
Set the water
discharging hose on
appropriate height.
(**)
No water appears in
the drum during
washing.
No fault. Water in the
non-visible part of the
drum.
-
Laundries have
detergent residues on
them.
Non-dissolving
particles of some
detergents may
adhere to your
laundries as white
spots.
Perform an extra
rinsing by setting your
machine to “Rinsing”
programme, or clean
the spots using a
brush after your
laundries dries.
Grey spots appear on
the laundries.
The reason for this
spots may be oil,
cream or ointment.
Apply the maximum
amount of detergent
instructed by the
detergent
manufacturer in the
next washing
operation.
(**) See the chapter regarding installation of your machine.
45
CHAPTER -10: TROUBLESHOOTING
