Sharp ES-V80HA User Manual Download

Page: 44 / 52

All repairing operations required for your machine should be carried
out by authorised service, personnel If your machine requires a repair
or if you cannot remove the fault by the help of the information
provided as follows:

  Unplug your machine.
  Turn the tap off.
  Contact the nearest authorised service technician.

FAULT

POSSIBLE CAUSE

REMOVING

METHODS

Your machine does
not start.

It is not plugged.

Plug it.

Fuses out of order.

Replace the fuses.

Electricity cut-off.

Check mains power.

Start/pause button
not pressed.

Press on start/pause
button.

Programme knob on
position 0.

Switch the
programme knob to
the desired position.

The machine door
not completely
closed.

Close the machine
door.

Your machine does
not intake water.

Your tap is turned
off.

Turn your faucet on.

Water inlet hose may
be twisted.

Check water inlet
hose.

Water inlet hose
clogged.

Clean water inlet
hose filters. (*)

Valve inlet filter
clogged.

Clean the valve inlet
filters. (*)

The machine door
not completely
closed.

Close the machine
door.

(*) See the chapter regarding maintenance and cleaning of your
machine.

CHAPTER -10: TROUBLESHOOTING

Summary of Contents for ES-V80HA





















































Search results

Summary of Contents for ES-V80HA

Reviews:

Related manuals for ES-V80HA

Brands by name

Popular brands

Sharp ES-V80HA, User Manual

Search results

Summary of Contents for ES-V80HA

Reviews:

Related manuals for ES-V80HA

Brands by name

Popular brands