4
INSTALLATION INSTRUCTIONS
Location of washer
Check location where washer will be installed. Make sure you have everything
necessary for correct installation.
Proper installation is your responsibility.
• Do not place or store your washer below 0°C (32°F) to avoid any damage from freezing.
• Install the washer on the horizontal solid floor.
• To reduce the risk of fire, this appliance must be fastened or otherwise secured to an
uncovered concrete floor.
Drain system
Never forget to install drain hose before operating your washer.
The packing box is opened, there are a drain hose the washer.
If the washer is installed on an unsuitable floor, it could make
considerable noise, vibration and cause a malfunction.
If washer is not level, adjust the front leg(A) up or down for
horizontal setting.
• Earthed electrical outlet(B) is required with 20cm of bottom
back of washer cabinet.
• Water faucets (C) must be within 1M of the upper back of
the washer cabinet and provide water pressure 0.3kgf/cm
2
-
8kgf/cm
2
(0.03MPa ~ 0.8MPa).
• Connect the drain hose to the drain outlet at the back of the washer.
Non-Pump Model
NOTES
• The opening must not be obstructed by carpeting when the washing machine is installed
on a carpeted floor.
UP
C
B
A
DOWN
Drain hose
