8
THE FUNCTIONS OF THE CONTROL PANEL
• Press this button to turn the power 'ON' or 'OFF'.
• Operation and temporary stop is repeated as it is pressed.
• When you want to change course in operating;
press the 'Start/Pause' button
→
Select the course that you want to change
→
press the 'Start/Pause' button again.
• It can be used to select the full-automatic course.
• By turning(right) the 'Program' Dial, course will be selected by following
order :
Auto/Fuzzy
→
Baby Care
→
Quick
→
Tub clean
→
Blanket
→
Wool
→
...
• This selection is effective for blue-jean, etc ...
• Washing time, rinse times and spin time are selected automatically depend
on amount of laundry.
• Select the desired amount of water depending on the amount of laundry.
• As the button is pressed, water level is selected by
MEDIUM
→
HIGH
→
EXTRA LOW
→
LOW
→
MEDIUM
→
...
• It can be used to adjust washing time.
• As the button is pressed, washing time will be repeated.
18
→
OFF(0)
→
6
→
10
→
15
→
18
→
...
• Use it to change the number of rinses.
• As the button is pressed, the times of rinse will be repeated.
3 times
→
4 times
→
OFF(0)
→
1 time
→
2 times
→
3 times
→
....
• It can be used to change spin time.
• As the button is pressed, spin time will be repeated.
5
→
7
→
9
→
OFF(0)
→
1
→
3
→
5
→
7
→
...
• Use it to set time reservation.
• If the 'Res.' button is pressed, '2' is displayed.
You can reserve it from 2 to 48 hours in advance.
• Each pressing of the button advances on time delay by one hour.
2
→
3
→
4
→
…
→
46
→
47
→
48
→
2
→
3
→
4
→
…
• It can be used to adjust the wind-drying time after spin.
• As the button is pressed, the wind-drying time will be repeated as following;
10
→
20
→
30
→
40
→
0
