Sharp ER-A520 Knowledge Book Download Page 11

Page: 11 / 275

System Preset

Specifications subject to change without notice:

Revision date 10/07

Page 5

of 266

Procedure- B:

Remove the AC power cord from the outlet.

Place the mode switch to the SRV’ position.

Replace the AC power cord into the wall outlet.

Turn the mode switch clockwise to the SRV position (7 o’clock).

Procedure- C:

(based on SRV Job#926-B)

Remove the AC power cord from the outlet.

Place the mode key in the PGM2 position.

Depress and hold the [RECEIPT] & [JOURNAL] feed keys.

Replace the AC power cord into the wall outlet while holding the keys.

Note:

***Procedure A must be used to reset the hardware. Procedures B and C cannot reset the
hardware.

CAUTION:

Never enter the SRV mode in the middle of a transaction – severe damage may result to the sales
totals.

Summary of Contents for ER-A520




















































































































































































































































































Search results

Summary of Contents for ER-A520

Reviews:

Related manuals for ER-A520

Brands by name

Popular brands

Sharp ER-A520, Knowledge Book

Search results

Summary of Contents for ER-A520

Reviews:

Related manuals for ER-A520

Brands by name

Popular brands