68
Information Bar
When the [
INFO
] button is pressed on the remote control, the information bar will appear at the top of the
screen.
If the [
INFO
] button is pressed again, the information bar will change to show further detail.
This shows a large amount of information on the channel currently being received, this includes the following:
•
Channel selected
•
Program being transmitted
•
Time progress bar
•
Program start and end time
•
Time of day
•
Description of the program
•
Subtitles available
•
Audio description available
•
Program genre
UPDATING SOFTWARE
There are a number of ways in which the software on your set can be updated. When your set is produced,
the software installed will ensure the correct operation of the set, this may need to be updated should
improvements be made and this is normally carried out automatically if the set is connected to the internet.
Note
: For further support with software updates, contact our technical support team or refer to the
‘Product Support’ section of the website. If the television is using the newest software available it will not
attempt to update the software.
If your set is outside of guarantee and the installation of the software causes a di
ff
erent issue you may be
liable for a chargeable repair service. The reason for this is because you may have a fault which can cause
corruption on one of the boards when installing the software. This could result in your unit locking into
SAFE mode whereby it is stuck in standby. This is not a fault with the software, this would be caused by an
existing faulty board that would have required a repair.
Digital TV & Freeview Play
