EN-9
CAUTION
EN-14
EN-13, 14
EN-7
EN-17
1
Click!
②
①
3
2
CAUTION
VACUUMING
Flow of cleaning process
Emptying the Dust Cup
Remove the Dust Cup and dispose of
the dirt.
Remove dirt on the Mesh filters
with a cleaning brush.
Press the Dust disposal
hook (yellow) on the side of
the Cover section.
Lift the Cover
section.
Ensure that no dirt
remains at the bottom
of the Dust Cup.
Cover
section
Mesh filter
Mount the Dust Cup.
Protrusion
Dust
disposal
hook
(yellow)
Align the protrusion on the Dust Cup and the
Dust disposal hook (yellow) and insert.
When used continuously for long time
Dust disposal
hook (yellow)
Securely push in the direction of
the arrow
Hook
(blue)
Click!
Recessed
section
Put the recessed section on the Dust
Cup to the hook (blue) on the vacuum
cleaner body
Install the Dust cup assembly
on the vacuum cleaner body.
When the dirt is
entangled and does
not come off
Clean the Dust cup
assembly.
Dust accumulates on the built
in Pleat Filter.
Clean this dust out.
Mounting the Dust
Cup Assembly
Control
switch
The mode toggles between the "High mode" and the "Standard
mode" each time it is pressed.
High mode: When cleaning with maximum suction power.
Standard mode: When cleaning with subdued suction power.
(When a mat or a rug tends to block the Suction head,
for instance.)
Start
Finish
The Rotary brush stops automatically for safety
purpose when the Suction head (roller switch on the
bottom side ) is off the floor while cleaning.
The operation does not stop in such instances.
The rotation restarts when the Suction head contacts
the floor and moved.
Cleaning
completed
Notices
Safety Stop
Even when a cleaning session is completed in the Standard mode, the operation starts with the
High mode if the is pressed the next time.
The Rotary brush of the Suction head automatically turns when the cleaning starts.
When the remaining charge in the battery becomes depleted while operating, the operation is
automatically stopped to prevent excessive discharge that can deteriorate battery. Always charge
the battery each time the product is used for cleaning, regardless of how long it was used.
Charging the
battery
Disposing of dirt is recommended
after each cleaning session, for the
purpose of hygiene.
Even when the Suction
head contacts the floor if
the Roller Switch is off the
floor the operation is
temporarily suspended.
Do not touch the Rotary Brush or Roller Switch while the operation is
temporarily suspended.
[Risk of injury when the Rotary brush starts to operate]
Be sure to press the to stop the operation when cleaning the Suction
head.
Caution is required to
ensure that the Mesh
filters (Upper and
Lower) are not lost
while throwing out dirt
or cleaning.
The Dust cup assembly cannot be
installed properly on the vacuum
cleaner body unless it is
completely assembled.
The Pleat filter cannot be installed
on the vacuum cleaner body unless
it is installed on the Dust Cup.
The suction power may decline,
abnormal noise may be heard, dirt
may enter into the motor and other
issues may arise that may lead to
product malfunction unless the Dust
cup assembly is securely installed
on the vacuum cleaner body.
EN-15, 16
EN-15, 16
EN-13
Tips
EN-15, 16
CAUTION
EN-10
CAUTION
EN-17
EMPTYING THE DUST CUP
Guide for disposing
of dirt
Mesh filter
Disposing of dirt is recommended after
each cleaning session, for the purpose of
hygiene.
"MAX" line
MAX
(Red: Turned on)
Pull out from the
position depicted
in the diagram.
It is on the vacuum cleaner body
side after the Dust cup assembly
has been removed.
Removing the Cleaning Brush
Removal
Removing the Dust cup assembly
Cup release lever
For cleaning
floors.
Moving the Suction head (wheel) sideways or diagonally can result in scratches and markings on
the floor surface.
The product can be left in the conditions depicted in the diagrams below when pausing
the cleaning operation.
Resting the
vacuum cleaner
Do not leave the product while leaning on an object.
Verify that there is nothing in the vicinity of the product that can be damaged easily when standing
the vacuum cleaner body leaned on an object.
Pay particular attention to ensure no infant or pet is allowed to get near the product.
Keep the Suction head contacting the floor surface when pausing the cleaning operation.
[Risk of falling or tumbling of the product]
Hook the holder
section onto a
table or the like.
Hook the holder
section on a chair
or the like.
Place the product on a flat floor.
Always press the and stop the
operation of the product.
Standing state
Do not clean while pressing the Suction head hard against the floor surface.
The wheels and Napped cushions may wear quickly and scratch the floor surface.
Always install the Suction head or an Accessory Suction head when cleaning.
[Risk of scratching of floor surface or product malfunction]
There are instances where the rotation of the wheels deteriorate due to the entanglement of pet hair and
the like on the wheels. Be sure to clean the wheels often.
Move the Suction head so that it moves
lightly and glides slowly.
More dirt is suctioned this way than quickly
moving the Suction head back and forth.
This also prevents scratching of the vacuum
cleaner and the floor surface.
Stick state
Handy state
For cleaning
stairs.
Pull the
Cup release lever
while standing the vacuum
cleaner body vertically.
Cleaning is not
required for the built
in filter.
Do not remove the
filter.
Dispose of the dirt in the Dust Cup and
follow the procedure described on the right
to remove the dirt on the Mesh filter. If the
lamp still does not turn off, clean the unit.
The lamp may also turn on when the Suction head is
blocked (when cleaning a mat or when using an
enclosed nozzle and the like) even when the filter is
not dirty. In such instances, press the and then
restart operation to turn the lamp off.
Dispose of the dirt on newspapers or over a dirt
bin. [Dust could spill out]
Continuing to operate the product without
disposing of the accumulating dirt results in the
deterioration of the suction power due to the
attachment of the dirt on the Mesh filters. Be sure
to dispose of the dirt.
Continuing to operate the product without
disposing of the dirt may lead to the product
malfunction.
When the level of the accumulated
dirt reaches the "MAX" line.
When the Filter care lamp (red)
is turned on*
Removal
Tips for Vacuuming
Dispose of the dirt before the level of the
accumulated dirt exceeds the height of the
line, even when the dirt is leaning on one
side or the other.
Holder
section
MAX
EN-17
EC-A1RA_Eng_A4(ai sorted).indd 10
2017/07/07 11:43:19
