Sharp DW-J20FA, Operation Manual

Page: 14 / 40

EN-12
NOTE How to clean and remove a heavy dirt.
Back Panel
1. Add a small amount of neutral
detergent to water and soak for
about 10 minutes.
CAUTION
Do not give excessive pressure to
the back panel when scrubbing it.
2. Rinse off the neutral detergent with
clean water.
3. Completely dry the fi lter in a well-
ventilated area.
Sensor Filter
1. Remove the Back Panel.
2. Remove the sensor fi lter.
3. If the sensor fi lter is very dirty, wash
it with water and dry it thoroughly.
WATER TANK
(About once a week)
BACK PANEL / SENSOR
(About once every 2 weeks)
MAIN UNIT
(About once a month)
CARE AND MAINTENANCE
Remove the dust
gently with a
cleaning tool such
as a vacuum cleaner.
Wipe with a dry, soft cloth.
Do not wash with water.
1. Remove the Tank Cover, and dispose
of the water.
▶
Tank Cover
2. Wash the inside of the Water Tank.
NOTE
• If the dirt is heavy, please dissolve neutral
detergent in lukewarm water and wash.
3. Dry the tank with a soft cloth.
Check the fl oat.
4. Install the Tank Cover.
Sensor Filter
DW-J27FA̲J20FA̲EN.indd EN-12 2018/08/31 15:38:07