Sharp DW-J20FA, Operation Manual

Page: 12 / 40

EN-10
OPERATION
HOW TO CHANGE VARIOUS SETTING
Type of setting
Function Setting
Auto Restart
If the Main Unit is
unplugged or if there is a
power failure, the Main Unit
will resume operation with
the previous settings after
power is restored.
Cancellation
ON
(default)
Sound Indicator Setting
You can turn off the beeping
sound when the Main Unit
stops perating as follows.
When the Main Unit stops
operating as the following
situation, you can turn off
the beeping sound.
Cancellation
ON
(default)
Light Control
You can select the
brightness of the Front
Display.
Turn off
When set to “Turn off”, the
“Darker” light illuminates for 8
seconds after operation starts
and then the light turns off.
The FULL Light fl ashes darker
only when the Water Tank is full.
Darker
Auto
(default)
Light automatically switches
based on room brightness.
Room Front Display
bright brighter
dark darker
* When "SLEEP" mode operate;
Room is bright : light is darker
Room is dark : light is OFF
PLASMACLUSTER ION
ON/OFF
OFF
ON
(default)
Auto Off
The operation will stop
automatically after 12 hours in
case the Main Unit has been
forgotten to be turned off.
Cancellation
ON
(default)
Adjusting Sensor Sensitivity (F6-F8)
Light Sensor Low
Dust(sensitive)
Sensor
Standard
(default)
Odor Sensor High
* Light Sensor : Default is "Middle".
Dust(sensitive) and Odor Sensor : Default is "High".
You can change the functions in the table "Type of setting".
1.
Turn off the Main Unit power.
2.
more 3 sec.
♪
3.
Select "Function number".
Forward Reverse
or
････
Set
♪
4.
Select "Setting number".
Forward Reverse
or
Set
♪
5.
Press Power ON/OFF Button to
fi nish the setting mode.
♪
〜
Turn off
♪
♪
♪
♪
DW-J27FA̲J20FA̲EN.indd EN-10 2018/08/31 15:37:52