Sharp DW-D20A, Operation Manual

Page: 10 / 24

18
Filter
Filter
Tab (4 places)
IMPORTANT NOTICES DURING CLEANING
FILTER/SENSOR
Once every two weeks
●
●
NOTE
●
For heavy dust
1
Hole in main unit
Filter tab
Do not use the following.
(Otherwise, the surface may be damaged or cracked.)
Vacuum cleaner
Filter
Sensor
CARE AND
MAINTENANCE
We recommend
periodical cleaning for
a long, clean and
sanitary use!
Please use the specified
cleaners
Thinner
Benzine
Alcohol Oven cleaner
Cleanser
Bleach Housing and furniture
Synthetic detergent
(Alkaline) Spray cleanser
Steel wool
Benzine
Thinner
Bleach
Spraying detergent
Lapping powder
Abluent Synthetic detergent Ablu
uen
Remove the dust
with vacuum cleaner
Take off the filter cover
Take the filter off
from the cover Wash off the dust from the
net and dry it
(Remove gently with a small brush)
Filter
cover
Use mild detergent
(dishwashing soap) in
lukewarm water for
heavier dusts.
Attach the filter to the cover Reattach to the original place
(Securely place the 4
filter tabs)
Attach the filter with
mark upwards.
Clogged filter may cause reduced dehumidification or consume more electricity.
Dust will accumulate inside the main unit without the filter which may cause malfunctions.
19
CARE AND MAINTENANCE
1
2
4
3
●
●
WATER TANK
Once a week
NOTE
●
●
●
●
WARNING
[Otherwise, electric shock or injury may be caused]
Tank lid
Check float
If float comes off
Pin
Magnet
Float
Tank lid
( (
Drain outlet
Always turn the operation “OFF” and
unplug the power plug.
Dispose water
and take the
tank lid off
Remove the lid slowly from the
corner.
Wash the
inside of the
tank
Wash the tank with dishwashing
sponge.
Use mild detergent (dishwashing
soap) with lukewarm water if
necessary.
Dry the tank
with soft cloth
Check to see if the float is
securely attached.
Check the direction of float, and then
insert the float.
Magnet: Facing up
Facing outside of tank
Insert pin and
secure.
Put the tank
lid on
Be sure to tightly close the tank
lid. (To prevent water leakage)
Be careful not to damage the float.