Sharp DV-SL80X, Operation Manual

Page: 15 / 24

– 15 – EN
PLAYING A DISC
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
DVD
NOTES:
• Repeat Title/Chapter is not available with some scenes.
• The REPEAT setting will be cleared when moving to
other title or chapter.
Repeat
• REPEAT are available only during playback.
CHAPTER TITLE OFF
( current chapter repeat) ( current title repeat) (repeat off )
DVD-RW
ALL
( entire disc repeat)
VR mode
A-B REPEAT
Press A-B REPEAT at your chosen starting point.
• A- appears briefly on the TV screen.
Press A-B REPEAT again at your chosen end point.
• A-B appears briefly on the TV screen, and the repeat
sequence begins.
To exit the sequence, press A-B REPEAT .
NOTES:
• The A-B REPEAT section can only be set within the cur-
rent title (for DVDs), or current track (for audio CDs).
• A-B REPEAT is not available with some scenes in DVD.
• To cancel the A point which was set, press
CLEAR .
• A-B REPEAT playback does not function during title,
chapter, track or all repeat playback.
3
2
1
VCD DVD-RW CD DVD
NOTES:
• The REPEAT setting will be cleared when moving to
other track.
• Repeat playback does not function during A-B REPEAT
playback.
To activate the repeat function, press REPEAT during playback.
• The repeat mode changes as described below every time
you press the button.
VCD CD
TRACK ALL OFF
( current track repeat) ( entire disc repeat)
(repeat off )
VR mode
without PBC function
JPEG MP3
This shuffles the playing order
of tracks instead of playback in
the sequence.
In stop mode, press MODE
repeatedly until the RAN-
DOM screen appears.
Press PLAY to start random
playback.
NOTES:
• To repeat the current track in the random selection,
press REPEAT repeatedly until TRACK appears
during playback. To repeat the entire random selection
press
REPEAT repeatedly until ALL appears during
playback.
• Refer to page 17 for programme playback of MP3 and
JPEG.
2
1
CD
Random Playback (CD)
You may determine the order in which tracks will play.
Press MODE (playback
must first be stopped).
• The PROGRAM screen
will appear.
Press
▲
or
▼
to select a
track, then press ENTER .
• Press CLEAR to erase
the most recently entered
programme.
Press PLAY to play the programmed tracks.
NOTES:
• While the programme is being played back, the STOP
works as follows.
• Press STOP once and then PLAY again, playback will
restart from the point where STOP was pressed.
(Programme continued)
• Press STOP twice and then PLAY . Playback starts
from the track in the original order. However, the pro-
gramme can be called back when you follow the above
steps. Your programmes will be stored unless either the
disc tray is opened or power is turned off.
• Up to 99 programmes can be entered.
• To erase all programmes at once, select ALL CLEAR at
the bottom of the list at Step 2.
• To repeat the current track in the programme, press
REPEAT repeatedly until TRACK appears during
playback. If you like to repeat the entire programme
press
REPEAT repeatedly until ALL appears during
playback.
• Refer to page 17 for programme playback of MP3 and
JPEG.
3
2
1
CD
Programme (CD)
0:03:30
CHAPTER TITLE OFF
( current chapter repeat) ( current title repeat) (repeat off )
TRACK GROUP OFF
( current track repeat) ( current group repeat) (repeat off )
ALL
( entire disc repeat)
E5946AD.qx3 04.4.12 5:36 PM Page 15