Sharp DV-RW2U Operation Manual Download Page 3

Page: 3 / 112

CAUTION

: Please read all of these instructions

before you operate this product and save these
instructions for later use.

Electrical energy can perform many useful functions. This
product has been engineered and manufactured to assure
your personal safety. BUT IMPROPER USE CAN RESULT IN
POTENTIAL ELECTRICAL SHOCK OR FIRE HAZARDS. In
order not to defeat the safeguards incorporated in this
product, observe the following basic rules for its installation,
use and servicing.

1. Read Instructions

–

All the safety and operating instructions

should be read before the product is operated.

2. Retain Instructions

–

The safety and operating instructions

should be retained for future reference.

3. Heed Warnings

–

All warnings on the product and in the

operating instructions should be adhered to.

4. Follow Instructions

–

All operating and use instructions

should be followed.

5. Cleaning

–

Unplug this product from the wall outlet before

cleaning. Do not use liquid cleaners or aerosol cleaners. Use a
damp cloth for cleaning.

6. Attachments

–

Do not use attachments not recommended by

the product manufacturer as they may cause hazards.

7. Water and Moisture

–

Do not use this product near water–for

example, near a bath tub, wash bowl, kitchen sink, or laundry
tub; in a wet basement; or near a swimming pool; and the like.

8. Accessories

–

Do not place this product on an unstable cart,

stand, tripod, bracket, or table. The product may fall, causing
serious injury to a child or adult, and serious damage to the
product. Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer, or sold with the product.
Any mounting of the product should follow the manufacturer’s
instructions, and should use a mounting accessory recom-
mended by the manufacturer.

9. Transportation

–

A product and cart

combination should be moved with care.
Quick stops, excessive force, and
uneven surfaces may cause the product
and cart combination to overturn.

10. Ventilation

-Slots and openings in the cabinet are provided for

ventilation to ensure reliable operation of the product and to
protect it from overheating, and these openings must not be
blocked or covered. The openings should never be blocked by
placing the product on a bed, sofa, rug, or other similar surface.
This product should not be placed in a built-in installation such
as a bookcase or rack unless proper ventilation is provided or
the manufacturer’s instructions have been adhered to.

11. Power Sources

–

This product should be operated only from

the type of power source indicated on the marking label. If you
are not sure of the type of power supply to your home, consult
your product dealer or local power company. For products
intended to operate from battery power, or other sources, refer
to the operating instructions.

12. Grounding or Polarization

–

This product is equipped with

either a two-wire polarized plug (one plug blade bigger than the
other) or a three-wire grounded plug (a third pin for grounding).
The two-wire polarized plug will fit only one way into the power
outlet. The three-wire grounded plug will fit only into a
grounding-type power outlet.
If the plug does not fit, ask your electrician to replace your
obsolete outlet. Do not modify the plug. To do so will void the
safety feature.

13. Power-Cord Protection

–

Power-supply cords should be

routed so that they are not likely to be walked on or pinched by
items placed upon or against them, paying particular attention
to cords at plugs, convenience receptacles, and the point
where they exit from the product.

14. Outdoor Antenna Grounding

–

If an outside antenna or

cable system is connected to the product, be sure the antenna
or cable system is grounded so as to provide some protection
against voltage surges and built-up static charges. Article 810
of the National Electrical Code, ANSI/NFPA 70, provides
information with regard to proper grounding of the mast and
supporting structure, grounding of the lead-in wire to an
antenna discharge unit, size of grounding conductors, location
of antenna-discharge unit, connection to grounding electrodes,
and requirements for the grounding electrode. See diagram
below.

15. Lightning

–

For added protection for this product during a

lightning storm, or when it is left unattended and unused for
long periods of time, unplug it from the wall outlet and
disconnect the antenna or cable system. This will prevent
damage to the product due to lightning and power-line surges.

16. Power Lines

–

An outside antenna system should not be

located in the vicinity of overhead power lines or other electric
light or power circuits, or where it can fall into such power lines
or circuits. When installing an outside antenna system, extreme
care should be taken to keep from touching such power lines or
circuits as contact with them might be fatal.

17. Overloading

–

Do not overload wall outlets, extension cords,

or integral convenience receptacles as this can result in a risk of
fire or electric shock.

18. Object and Liquid Entry

–

Never push objects of any kind

into this product through openings as they may touch
dangerous voltage points or short-out parts that could result in a
fire or electric shock. Never spill liquid of any kind on the
product.

19. Servicing

–

Do not attempt to service this product yourself as

opening or removing covers may expose you to dangerous
voltage or other hazards. Refer all servicing to qualified service
personnel.

20. Damage Requiring Service

–

Unplug this product from the

wall outlet and refer servicing to qualified service personnel
under the following conditions:

a. When the power-supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the

product.

c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the

operating instructions. Adjust only those controls that are
covered by the operating instructions, as an improper
adjustment of other controls may result in damage and
will often require extensive work by a qualified technician
to restore the product to normal operation.

e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in

performance, this indicates a need for service.

21. Replacement Parts

-When replacement parts are required,

be sure the service technician has used replacement parts
specified by the manufacturer or have the same characteristics
as the original part. Unauthorized substitutions may result in fire,
electric shock, or other hazards.

22. Safety Check

-Upon completion of any service or repairs to

this product, ask the service technician to perform safety
checks to determine that the product is in proper operating
condition.

23. Heat

-This product should be situated away from heat sources

such as radiators, heat registers, stoves, or other products
(including amplifiers) that produce heat.

IMPORTANT SAFEGUARDS

NEC- NATIONAL ELECTRICAL CODE

ANTENNA LEAD-IN WIRE

ELECTRICAL

SERVICE

EQUIPMENT