Sharp DV-RW2U Operation Manual Download Page 101

Page: 101 / 112

101

Problem

Suggested Solution

Can not control your TV using this remote
control

Unable to Record, Timer Record or
Automatically Record from an External Input

Nothing is Recorded Following Recording

Unable to Record onto a DVD-RW Disc in
the Video Mode

Images from a Camcorder Connected to the
DV IN/OUT terminal are not Displayed, are
Displayed without Sound or the Camera
does not Operate Properly

A Camcorder Connected to the DV IN/OUT
terminal cannot be Controlled with this
Product

Images are Distorted (Appear Improperly)
during External Input or Broadcasts with
Poor Reception

There is no On-screen Display during
Playback

• Check that you entered the correct code for your TV

• Place a disc for recording (DVD-R or DVD-RW) in the recorder and after

confirming that disc identification (loading) has been completed, perform the
respective procedures for recording, timer recording or automatically
recording from an external input.

• There is nothing recorded when a channel has been recorded that is not

broadcasting (or for which broadcasting has ended). There may also be
nothing recorded when a channel with poor reception has been recorded.

• Use a Ver 1.1 disc or later. (The version is usually indicated on the back of

the disc jacket).

• Recorded material protected with a copy guard cannot be viewed.
• Check the connections.
• Turn the power OFF and then turn it back ON again.
• Reconnect the DV cable.
• Try setting “DV LINK” to “OFF”.
• Switch “DV AUDIO IN”.

• Set “DV LINK” to “ON”.
• Some types of camcorders may not be able to be controlled.

• Switch “3D Y/C” to “OFF”.

• Check whether or not “DUBBING” is set to “ON”. When this is set to ON, the

on-screen display is forcibly set to OFF during playback.

NOTE

• This recorder is equipped with a microprocessor. Its performance could be adversely affected by external electrical noise

or interference. If this should happen, unplug the product and plug it in again after a few minutes.

• Press

RESET

with a toothpick or other narrow rod-like object (nonmetal) when the recorder does not operate properly even

after the power has been turned off and then back on again.

• Since the clock, channel, timer recording programs and other data in memory are also reset when

RESET

has been

pressed, they must be set again.

• EZ Set Up function starts automatically when

RESET

is pressed.

Service Informatino (For the U.S.)

For the location of the nearest Sharp Authorized Service Center, or to obtain product literature, accessories, supplies or
customer assistance, please call

1-800-BE-SHARP

(1-800-237-4277) or visit SHARP’s website (http://

www.sharp-usa.com

1. Do not attempt to service this product yourself. Instead, unplug it and contact a qualified service technician. (See

CON-

SUMER LIMITED WARRANTY

at the end of this manual.)

2. Be sure the service technician uses authorized replacement parts or their equivalents. Unauthorized parts may cause fire,

electrical shock, or other hazards.

3. Following any service or repair, be sure the service technician performs safety checks to certify that this product is in safe

operating order.

Troubleshooting