GB-97
■
DVD
Problem
•
The DVD player is switched on but
does not operate.
•
The playback image does not
appear.
•
No sound is produced.
•
The sound is not Dolby Digital (5ch
or 5.1ch).
•
The image and sound are garbled.
•
The sound is not stable during
playback.
Suggested Solution
•
Have you loaded a disc?
•
Is the disc unplayable? (See pages 9 – 11.)
•
Is there dew in the DVD player? (See page 11.)
•
Are the video and audio cables connected correctly? (See pages
18 – 23.)
•
Is the disc scratched? (See page 11.)
•
Is the disc dirty? (See page 11.)
•
Is the disc loaded upside down?
•
Is the input selector on the TV set to “VIDEO” or “AV”?
•
Is the audio equipment switched on and are all the components
connected properly? (Refer to the operation manuals for your
audio equipment.)
•
Is the disc you are playing recorded in Dolby Digital (5ch or
5.1ch)?
•
Have you set the “
DIGITAL” in “AUDIO SETUP” to
“BITSTREAM”? (See page 45.)
•
Is the disc scratched? (See page 11.)
•
Are vibrations from the speakers affecting the DVD player?
•
Set the “COMPRESSION” in “AUDIO SETUP” to “OFF” (See page
45.)
This unit is equipped with a microprocessor. Its performance could be adversely affected by external electrical
noise or interference. If this should happen, unplug the Unit and plug it in again after a few minutes.
Troubleshooting
Possible Cause/Solutions
•
Broadcast does not carry VPS/PDC signal which alters recording
time.
•
Check VPS/PDC mode is switched ON.
•
Ensure date and time are correctly set on the Unit.
•
Make sure there is no other tape in the VCR.
•
Make sure you are loading the tape correctly.
•
Make sure the tape is not at the start.
•
The channel position has been set to be skipped. Cancel the SKIP
mode for that channel.
•
Make sure all the cables are connected properly.
•
Make sure the VCR power cord is properly plugged in.
•
Possible weak signal strength, the same channel with a better
signal strength may have been tuned in on another VCR preset
channel. Example; VCR preset 1 = ZDF and VCR preset 14 = ZDF
(Refer to Manually Sorting Channels section to move the channel
to your desired position.)
•
TV aerial may need adjusting.
Problem
•
The S
HOW
V
IEW
system does not
record desired programme.
•
Tape can not be loaded.
•
Rewind is not possible.
•
Desired channel position can not be
selected.
•
No colour or poor TV picture on
normal viewing.
•
Desired channel has interference.
O
THER
INFORMA
TION
DVNC65SE096_101.pm6
9/10/02, 10:31 am
97
http://www.usersmanualguide.com/
