GB-59
Audio Output Mode
/
OPEN/
CLOSE
OPERATE
VCR/DVD
SELECTOR
VCR MENU
DVD SETUP
TAPE
SPEED
ON
SCREEN
TIMER
ON/OFF
TITLE
DVD MENU
DISPLAY
SHOWVIEW
EJECT
FUNCTION
CONTROL
PROG/
REPEAT
ANGLE
CLEAR
RETURN
REV
FWD
SET
ENTER
ZERO BACK
SKIP SEARCH
TV/VCR
VCR DVD
AM/PM
INPUT SELECT
PAUSE/STILL
REC
PLAY
STOP
SLOW
CH
VCR
DVD
SKIP
DPSS
AUDIO
OUTPUT
VCR/DVD COMBINATION
RRMCGA071WJSA
Hi-Fi STEREO SOUND
Stereo sound is possible from this Unit if you have a stereo TV
connected to the Unit with a scart lead, or audio equipment con-
nected with audio phono leads. The Unit is normally set so that
stereo sound is possible. The sound output from the Unit is
controlled by
AUDIO OUTPUT
. If you wish to change the sound
output you can use
AUDIO OUTPUT
as follows:
• Press
AUDIO OUTPUT
once. The LEFT audio channel will be sent
to BOTH speakers.
q
will appear on the VCR Front Panel display.
• Press
AUDIO OUTPUT
again. The RIGHT audio channel will be
sent to BOTH speakers.
w
will appear on the VCR Front Panel
display.
• Press
AUDIO OUTPUT
a third time and the MONO track will be
sent to BOTH speakers.
q
and
w
will not appear on the VCR
Front Panel display.
• Pressing
AUDIO OUTPUT
a fourth time, normal Hi-Fi stereo sound
will be heard.
q
and
w
will appear on the VCR Front Panel
display.
NICAM/IGR Hi-Fi STEREO SOUND
Your Unit can receive and record NICAM/IGR sound. The Unit is
normally set so that NICAM/IGR sound is possible if it is present on
the receiving signal, otherwise the Unit will automatically switch to
receive the mono signal. NICAM/IGR sound can be turned off. If you
wish to do this follow the procedure below:
1
Press
VCR MENU
to display the menu screen.
2
Press
'
/
"
to select “MODE” then press
SET
to confirm.
• The MODE menu will be displayed with NICAM selected.
3
Press
\
\
\
\
\
/
|
|
|
|
|
to select “OFF”.
4
Press
SET
to confirm and return to the menu screen.
5
Press
VCR MENU
to exit to normal screen.
•
If the tape being played back does not carry sound recorded on Hi-Fi
tracks,
L
and
R
will not appear on the display.
•
lf the sound contains ‘crackling’ or ‘popping’ noises the sound quality
may be improved by adjusting the tracking using
CH
'
/
"
.
•
If the poor quality is for a long period the Unit will automatically select
the mono track and the sound will be in mono.
•
NICAM sound may not be stereo.
NICAM
AUTO
OFF
COLOUR
AUTO
PAL MESECAM
BLUE MUTE
AUTO
OFF
REPEAT ON
OFF
16:9
AUTO
OFF
SUPER.P
ON
OFF
:SELECT :CHANGE
SET :ENTER MENU:EXIT
DVNC65SE054_062.pm6
8/10/02, 8:42 am
59
http://www.usersmanualguide.com/
