![background image](http://html.mh-extra.com/html/sharp/dv-nc200s/dv-nc200s_operation-manual_368067008.webp)
S
ETUP
– 8 –
EN
A
BOUT
THE
R
EMOTE
C
ONTROL
Installing the Batteries for the Remote Control
Install two R-6 batteries (supplied) matching the polarity
indicated inside battery compartment of the remote control.
Hint
• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.
Operable Range
Keep in mind the following when using the remote control:
• Make sure that there is no obstacle between the remote control
and the remote sensor on the VCR/DVD.
• The maximum operable range as follows;
Beeline:
approximately 7 m (23 feet)
Either side of centre:
approximately 5 m (16 feet) within 30 degrees
Above:
approximately 5 m (16 feet) within 15 degrees
Below:
approximately 3 m (10 feet) within 30 degrees
PULL OPEN
D V- N C 2 0 0
OPERATE
OPEN/CLOSE
PLAY
STOP
DVD
VCR
CH
TIMER
REC
PLAY
REW
FF
STOP/
EJECT
(TRACKING)
OUTPUT
Buttons for DVD Only
DVD mode
Media type
Button
(Alphabetical order)
• Repeats playback of a selected section.
• Repeats playback of a selected section (VCD, CD).
• Press to change the camera angle to see the
sequence being played back from a different
angle (DVD-Video).
—
• Press to select DVD output mode and to use
the remote control in DVD mode.
• Press to select DVD output mode and to use
the remote control in DVD mode.
• Press to accept a setting.
• Press to accept a setting.
• Press to adjust the black parts of the picture
brighter.
• Press to adjust the black parts of the picture
brighter (VCD).
• Press to call back the Marker display.
• Press to call back the Marker display (VCD, CD).
• Activates Virtual Surround or Rapid Play.
• Activates programmed playback, random play-
back or folder playback mode (CD, MP3, JPEG).
• Activates the 3D sound (VCD, CD).
• Repeats playback of the current disc, title or
chapter.
• Repeats playback of the current disc, group or
track.
• Returns to the previous operation.
• Returns to the previous operation.
• Press to enter the setup mode or to change
setup items.
• Press to enter the setup mode or to change
setup items.
• Press to skip chapters or titles.
• Press to skip tracks.
• Press to select a desired subtitle language.
—
• Displays the title menu.
• Press to return to the first hierarchy in the
programme and file list when the file list is the
second hierarchy or deeper (MP3, JPEG).
• Enlarges part of a DVD-reproduced image.
• Enlarges part of a reproduced image (VCD, JPEG).
http://www.usersmanualguide.com/