Sharp DV-NC200S, Operation Manual

Page: 15 / 37

VC
R
F
UNC
TIONS
– 15 –
EN
Time Search
You can specify the time for fast forwarding or rewinding.
If a tape includes both programmes recorded in the PAL (or MESECAM)
system and ones recorded in the NTSC system, this function may not be
operated correctly.
• Insert a tape into this VCR/DVD.
1.
x2 (Twice)
TIME 0 : 0 0
2.
or
Within 30 seconds.
Select the desired length of time for fast forwarding or rewinding.
0:01 ~ 9:59
(1 minute~9 hours and 59 minutes)
TIME 2 : 5 0
3.
To rewind.
After searching ...
To fast forward.
Within 30 seconds.
4.
B
• When 0:00 is reached, the VCR/DVD will start playback
automatically.
Hint
• Time Search can be set up to 9 hours 59 minutes (9:59).
• This function is not available during recording.
• If the end of the tape is reached during a search, this VCR/DVD
will cancel the search and rewind the tape.
• To exit the Time Search mode, press MENU in step 2 , or press
STOP
C
after step 3 .
VCR/DVD COMBINATION NA527AD
1 2 3
6 5 4
7
0 +10
8 9
STOP
PLAY
VCR DVD
press first.
Index Search
You can specify the number of programmes to be skipped.
• The index mark will be made automatically when
REC/OTR is
pressed. It will also be marked at the starting point of Timer
Recording and OTR.
• The index mark is not recorded if STILL/PAUSE
F
is pressed and
released during recording.
• The time gap between index marks on the tape should be greater
than 1 minute for SP recording and 2 minutes for LP recording.
• Insert a tape into this VCR/DVD.
1.
x1 (Once)
INDEX 01
2.
Pro.1 Pro.2 Pro.3 Pro.4 Pro.5
02 01 01 02 03
Beginning
of tape End
of tape
CURRENT PROGRAMME
INDEX MARK
01 ~ 20
INDEX 03
or
Within 30 seconds.
3.
To rewind.
After searching ...
To fast forward.
Within 30 seconds.
4.
B
• When the preset programme is reached, the VCR/DVD will start
playback automatically.
Hint
• Index Search can be set up to 20.
• This function is not available during recording.
• If the end of the tape is reached during a search, this VCR/DVD
will cancel the search and rewind the tape.
• This VCR/DVD stores index mark at the beginning of the record-
ing. There should be time gap between 2 index marks for the
Index Search.
• To exit the Index Search mode, press MENU in step
2
, or press
STOP C after step 3 .
VCR/DVD COMBINATION NA527AD
1 2 3
6 5 4
7
0
+10
8 9
STOP
PLAY
VCR DVD
press first.
VCR/DVD COMBINATION
NA527AD
1 2 3
6 5 4
7
0 +10
8 9
STOP
PLAY
VCR DVD
press first.
You can repeat playback of a whole tape automatically.
• Insert a tape into this VCR/DVD.
1.
Select “SET UP”.
MENU
TIMER
B SET UP
INITIAL
or
To decide.
2.
SET UP
AUTO RETURN [ON]
B AUTO REPEAT [OFF]
PICTURE [NORMAL]
or
Select “AUTO REPEAT”.
3.
SET UP
AUTO RETURN [ON]
B AUTO REPEAT [ON]
PICTURE [NORMAL]
4.
AUTO REPEAT B
5.
To stop playback.
Hint
• To cancel Auto Repeat, follow steps 1 to 3 . Then, press Cursor B ,
so that
“
OFF
“
appears beside “AUTO REPEAT”. Press MENU to exit.
• If menu remains on the TV screen at step 3 , press MENU to exit.
• Once you select “AUTO REPEAT”, it stays in effect even after you
turn off the VCR/DVD.
Auto Repeat
Downloaded from: http://www.usersmanualguide.com/