Sharp DV-NC200 Operation Manual Download Page 8

Page: 8 / 37

ETUP

– 8 –

BOUT

THE

EMOTE

ONTROL

Installing the Batteries for the Remote Control

Install two R-6 batteries (supplied) matching the polarity
indicated inside battery compartment of the remote control.

Hint

• Do not mix alkaline and manganese batteries.
• Do not mix old and new batteries.

Operable Range

Keep in mind the following when using the remote control:
• Make sure that there is no obstacle between the remote control

and the remote sensor on the VCR/DVD.

• The maximum operable range as follows;

Beeline:

approximately 7 m (23 feet)

Either side of centre:

approximately 5 m (16 feet) within 30 degrees

Above:

approximately 5 m (16 feet) within 15 degrees

Below:

approximately 3 m (10 feet) within 30 degrees

PULL OPEN

D V- N C 2 0 0

OPERATE

OPEN/CLOSE

PLAY

STOP

DVD

VCR

TIMER

REC

PLAY

REW

STOP/
EJECT

(TRACKING)

OUTPUT

Buttons for DVD Only

DVD mode

Media type

Button

(Alphabetical order)

• Repeats playback of a selected section.

• Repeats playback of a selected section (VCD, CD).

• Press to change the camera angle to see the

sequence being played back from a different
angle (DVD-Video).

—

• Press to select DVD output mode and to use

the remote control in DVD mode.

• Press to select DVD output mode and to use

the remote control in DVD mode.

• Press to accept a setting.

• Press to adjust the black parts of the picture

brighter.

• Press to adjust the black parts of the picture

brighter (VCD).

• Press to call back the Marker display.

• Press to call back the Marker display (VCD, CD).

• Activates Virtual Surround or Rapid Play.

• Activates programmed playback, random play-

back or folder playback mode (CD, MP3, JPEG).

• Activates the 3D sound (VCD, CD).

• Repeats playback of the current disc, title or

chapter.

• Repeats playback of the current disc, group or

track.

• Returns to the previous operation.

• Press to enter the setup mode or to change

setup items.

• Press to enter the setup mode or to change

setup items.

• Press to skip chapters or titles.

• Press to skip tracks.

• Press to select a desired subtitle language.

—

• Displays the title menu.

• Press to return to the first hierarchy in the

programme and file list when the file list is the
second hierarchy or deeper (MP3, JPEG).

• Enlarges part of a DVD-reproduced image.

• Enlarges part of a reproduced image

(VCD, JPEG).

Downloaded from:

http://www.usersmanualguide.com/

Summary of Contents for DV-NC200






































Search results

Summary of Contents for DV-NC200

Reviews:

Brands by name

Popular brands

Sharp DV-NC200, Operation Manual

Search results

Summary of Contents for DV-NC200

Reviews:

Brands by name

Popular brands