S
ETUP
– 10 –
EN
C
ONNECTIONS
Connection to a TV
CAUTION:
• Be sure to turn off the VCR/DVD and equipment to be connected before connecting.
• Read through the Operation Manual for the equipment to be connected.
• Be sure to keep the VCR/DVD connection cables separate from the TV antenna cable when you install the VCR/DVD, because it may cause
electrical interference when you are watching television programmes.
Basic TV connection
CAUTION:
• Connect the VCR/DVD directly to the TV. Do not connect the VCR/DVD to a VCR,
then connect the VCR to the TV. Copyright protection in the VCR could distort the
picture playing on the VCR/DVD.
VCR
This VCR/DVD
TV
Hint
• Playback picture from DVD and VCR cannot be delivered through the Round Coaxial cable.
The Round Coaxial cable is only for sending the antenna signal to the TV.
• Connect the VCR/DVD directly to the TV.
If you attempt to view video on a TV connected via a VCR, the copy protection function will scramble the picture.
AV1
C
B
Y
C
R
COMPONENT
VIDEO IN
or
P
B
Y
P
R
VCR and Basic DVD Connection
Available on DVD only
Basic
Best
VIDEO OUT
ANALOG AUDIO OUT
S-VIDEO IN
Good
S-VIDEO OUT
or
COMPONENT
VIDEO OUT
DVD’s Picture Quality
Audio cable
(supplied)
Scart cable
(commercially
available)
S-video
cable
(commercially
available)
Component
video cable
(commercially
available)
TV
VCR/DVD
Hint
• The VCR/DVD is sending each video signals simultaneously. If you connected an S-VIDEO OUT and/or a COMPONENT VIDEO OUT with the
VIDEO OUT (SCART), make sure your TV’s input mode is set correctly according to the connection you made.
• You will not be able to hear all of the sound being output by the VCR/DVD if you use the audio cables (supplied) to a monaural TV that has
only one audio input jack.
• Be sure that the colours of the jacks and plugs match up when connecting the cable.
• If you want to listen to the audio through audio equipment, connect only the S-video, component video cable or Video cable through scart
output adapter to the TV.
• The S-VIDEO OUT and COMPONENT VIDEO OUT jacks are only useful in DVD mode.
• If your TV is compatible with 525 or 625 progressive scanning and you want to enjoy that high quality picture, you must connect the com-
ponent video cable to your TV’s component video input jacks (Y/P
R
/P
B
) and select progressive scanning mode. To set the mode, set “VIDEO
OUT” to “COMPONENT PROGRESSIVE (Component (P))” in the DISPLAY menu so that “P.SCAN” will appear on the display of this VCR/DVD. (The
progressive scanning is not available in the VCR mode.) See pages 29, 30 for more details.
• If your TV is not compatible with progressive scanning, use this VCR/DVD in interlace mode. Make sure that no “P.SCAN” is on the display of
this VCR/DVD. If so, set “VIDEO OUT” to “COMPONENT INTERLACE (Component (I))” in the DISPLAY menu so that “P.SCAN” on the display of this
VCR/DVD will disappear.
• ANALOG AUDIO OUT jacks and scart terminal are not available on the DTS audio.
T V
To EURO AV1 (TV)
terminal
Scart cable
(commercially available)
Round Coaxial cable
(supplied)
from
Antenna
AERIAL
RF OUT
To RF OUT
jack
To AERIAL
jack
To SCART
terminal
http://www.usersmanualguide.com/
