Sharp DV-L80 Operation Manual Download Page 33

Page: 33 / 113

SETTING UP

Battery Capacity Indicator

• The battery capacity indicator appears only while the display mode is “on”. The

indicator appears for a short while and then disappears.

• Battery condition, temperature, and operational conditions affect the

remaining capacity of a battery. Because of this the battery capacity
indicator is intended to be for reference purposes only.

• Regardless of the display mode, the low battery warning appears on the

display whenever the battery is about to go dead.

• The low battery warning does not appear when the display panel is closed.

When the POWER (G)/CHARGE(R) lamp flashes green, replace the battery
pack with a charged one or switch to AC adapter power.

• The low battery warning is being displayed until the battery goes dead. When the

battery goes dead, the POWER(G)/CHARGE(R) lamp turns off. When this
happens, replace the battery pack with a charged one or switch to AC adapter
power.

➜

Full charge

Low

Flashing

Summary of Contents for DV-L80


















































































































Search results

Summary of Contents for DV-L80

Reviews:

Related manuals for DV-L80

Brands by name

Popular brands

Sharp DV-L80, Operation Manual

Search results

Summary of Contents for DV-L80

Reviews:

Related manuals for DV-L80

Brands by name

Popular brands