GB
82
SPECIAL
FUNCTIONS
DVD
DVD
DVD-RW
DVD-RW
VIRTUAL DOLBY (QSURROUND) setting
This function allows you to enjoy a “surround sound” effect when you are using
an analogue connection (using AUDIO OUT on the Player) to 2-channel audio
equipment (TV, etc.).
Preparation:
To use the VIRTUAL DOLBY (QSURROUND) function
•
Set the “COMPRESSION” setting in “AUDIO SETUP” to “OFF” (see page 47)
and set the “SPEAKER” setting in “SPEAKER SETUP” to “2ch” (see page 56).
Refer to the table below about the types of audio format with which VIRTUAL
DOLBY (QSURROUND) works.
Use the following procedure to change the setting between “ON” and “OFF”,
and the level for the VIRTUAL DOLBY setting.
1
Press
FUNCTION
during playback.
• The Function control screen appears.
2
Use
'
or
"
to select
and then press
ENTER
.
Using the Function Control
“SPEAKER” settings
in “SPEAKER SETUP”
The speaker mode is set to
“2ch”.
Dolby
Digital
Types of audio recorded
on the disc
✕
✕
Dolby Digital
2ch/Linear
PCM
Dolby
Pro Logic
ON
DVD
DTS/MPEG
Audio
Ver. 2.0