Sharp DT300 - DLP Projector - 700 ANSI Lumens Operation Manual Download Page 40

Page: 40 / 73

-39

Adjustments and Settings

Select the menu icon.

Menu icon

Menu screen

Picture

Fine Sync

Options

Language

PRJ Mode

Press

to display the other

menu screens.

•

The menu icon for the selected menu
screen is highlighted.

Note

•

The “Fine Sync” menu is not avail-
able for INPUT 3 or 4.

•

For items on the menus, see the
tree charts on pages

and

Press

to select the item

you want to adjust.

Note

•

To display a single adjustment item,
press

after selecting the item.

Only the menu bar and the selected
adjustment item will be displayed.
Then if you press

, the follow-

ing item (“Bright” after “Contrast”)
will be displayed.

•

Press

to return to the previous

screen.

Press

to adjust the item

selected.

•

The adjustment is stored.

Press

•

The menu screen will disappear.

Adjust the item.

Select
the item.

DT-300̲E̲p29̲43.p65

03.10.29, 2:42 PM

Page 39

Adobe PageMaker 6.5J/PPC

Summary of Contents for DT300 - DLP Projector - 700 ANSI Lumens










































































Search results

Summary of Contents for DT300 - DLP Projector - 700 ANSI Lumens

Reviews:

Related manuals for DT300 - DLP Projector - 700 ANSI Lumens

Brands by name

Popular brands

Sharp DT300 - DLP Projector - 700 ANSI Lumens, Operation Manual

Search results

Summary of Contents for DT300 - DLP Projector - 700 ANSI Lumens

Reviews:

Related manuals for DT300 - DLP Projector - 700 ANSI Lumens

Brands by name

Popular brands