Sharp DK-V2, Operation Manual

Page: 9 / 16

9
DK-V2
Bluetooth
Listening to Bluetooth enabled devices
About Bluetooth technology
Bluetooth wireless technology is a short-range radio technology that
enables wireless communication between various types of digital
devices, such as mobile phone or computer. It operates within a
range of about 10 meters (30 feet) without the hassle of having to use
cables to connect these devices. Since the
Bluetooth technology
does not require line of sight between the communicating devices, it
is not necessary to line up the transmitting device and the receiver,
as in the case of infra red technology.
Communication System and Bluetooth Profile of this unit
There are many available Bluetooth Profiles describing the basic
communication methods, specific functions and uses, to enable
communication between devices.
This unit supports the following:
Communication System:
Bluetooth Specification version 1.2
Bluetooth Profile : A2DP (Advanced Audio Distribution Profile)
A2DP enables audio streaming from an A2DP equipped Bluetooth
stereo audio source device (eg mobile phone) to this unit. By
converting wireless stereo audio signal to analogue audio signal, you
can enjoy listening to the sound through this speaker system.
Note:
For details on how to operate the device to be connected, refer to
the operating manual supplied with the device.
Pairing Bluetooth devices
Bluetooth devices need to be initially paired first before they can
exchange data. Once paired, it is not necessary to pair them again
unless:
Pairing information is deleted whilst repairing, etc.
Pairing is made with more than 8 devices.
Pairing can only be made one device at a time. This unit can be
paired to a maximum of 8 devices. If subsequent device is paired,
the oldest device paired, will be deleted and replaced with the new
one.
This unit is reset. All pairing information is deleted when unit is
reset. (see page 13)
On indicators
Audio stream
Bluetooth mobile phone or
other
Bluetooth Stereo
audio source device
Status Illuminator around
ON/STAND-BY
button (blue)
Pairing indicator
(blue)
Power on Lights up Off
Pairing mode Lights up Blinking
Connecting or
communicating Lights up Lights up