Sharp disney DM008SH, User Manual

Page: 308 / 342

Ap
pe
ndix
15
15-
6
Troubleshooting
[
General
Troubleshooting
Problem Possible Cause Solution
Handset won't
power on
Was
"
pressed long
enough
?
Press " longer.
Battery may need to be
charged or replaced. Charge battery or install a
charged battery.
Battery may not be
properly installed.
Install battery properly ( P.15-4 ).
Operation is
restricted after
power on
Is Switch On/Off in PIN
Entry
On
?
If On , PIN is required. Enter
PIN according to onscreen
prompt.
Insert USIM Card
appears
USIM Card may not
be properly inserted.
Power off and check that
USIM Card is properly inserted,
then restart handset. If the
message still appears, USIM
may be damaged.
The correct USIM Card
may not be inserted.
Make sure the correct USIM
Card is inserted. The inserted
USIM Card may not be valid.
There may be debris
on IC chip/terminals. Clean relevant parts with dry
cloth and re-insert.
REFRESH appears
and handset
returns to Standby
Handset may have
been dropped or
subjected to shocks. Handset failed to recognize
USIM Card temporarily. This is
not a malfunction.
Operation is
restricted
Keypad Lock may be
active.
Cancel Keypad Lock ( P.1-21 ).
Function Lock may
be active.
Cancel Function Lock ( P.11-2 ).
Battery strength
indicator flashes
when not charging Ambient temperature
may be outside 5
o
C
to 35
o
C.
Use within an ambient
temperature of 5
o
C - 35
o
C.
Saved entry/folder
does not appear
on handset
Entry/folder may be
set to Secret. Activate Show Secret Data
(
P.11-3 ).
Handset/AC
Charger feels
warm
Handset/AC Charger
may warm while
charging.
Unless handset/AC Charger is
too hot to touch, warmth is
considered normal. Always
avoid prolonged skin contact
to prevent burn injuries.
Handset may warm
during extended
periods of use.
Handset may warm
during Video Calls.
Cannot access
Memory Card files Memory Card may not
be properly formatted. Use DM008SH-formatted
Memory Cards.
Clock settings
are lost Did you leave handset
without battery
?
Clock settings remain even
when removing battery for
replacement, etc. However, if
handset is left with no battery
or an exhausted one for an
extended period of time
(approximately one hour),
Clock will need to be reset.
Problem Possible Cause Solution