Gett
ing St
arted
1
1-
4
Charging Battery
Battery must be inserted in handset to
charge it.
Use specified AC Charger
ZTDAA1
(sold separately) only.
.
In this guide, ZTDAA1 is referred to as
"AC Charger."
.
Handset and AC Charger may warm
while charging.
1
Open Port Cover as shown
2
Insert Charger Connector
.
With arrows up, insert connector
until it clicks.
3
Extend blades and plug AC
Charger into AC outlet
.
Small Light illuminates red while
charging.
.
Small Light goes out when battery
is full.
4
Unplug AC Charger
.
Pull AC Charger straight out.
5
Disconnect handset
.
Squeeze Charger Connector
release tabs and pull straight out
to remove.
6
Fold back blades and
replace Port Cover
Charging Battery
AC Charger
Important AC Charger Usage Note
.
Fold back blades after charging. Do
not pull, bend or twist the cord.
AC 100V Outlet
AC Charger
Blades
Small Light
External Connector
Port
Release
Tabs
Port Cover
Arrows
Charger Connector
When Small Light Flashes
.
Battery is unchargeable; may be
defective or simply at the end of its
life; replace it.
