39
When an error message is displayed, proceed as follows:
Error messages
BLANK MD
CAN'T COPY
CAN'T READ
(
:Number or
symbol)
CAN'T EDIT
CAN'T REC
CAN'T WRITE
DISC FULL
E-CD 20
E. OVER
EDIT OVER
Er-MD
(
:Number or
symbol)
NAME FULL
NO DISC
NOT AUDIO
PLAY MD
PROTECTED
TEMP OVER
TOC FORM
(
:Number or
symbol)
TOC FULL
TOC FULL 1
? DISC
Remedy
●
For playback, replace it with a recorded Mini-
Disc.
●
Replace the CD.
●
Replace it with another disc.
●
Erase the disc and try recording again.
●
Change the stop position of the track and then
try editing it.
●
Re-record or replace the MiniDisc.
●
Set this unit to the stand-by mode and try to
write the TOC again. (Remove any source of
shock or vibration while writing.)
●
Replace the disc with another recordable disc,
or erase some of the tracks on the disc to free
up recording space.
●
Set this unit to the stand-by mode and turn the
power on again.
●
Decrease the number of tracks.
●
Replace it with a disc that has enough time to
record.
●
Set this unit to the stand-by mode and turn the
power on again.
●
Shorten the disc or track name.
●
Load a MiniDisc.
●
Reload the MiniDisc.
●
Load a CD.
●
Reload the CD.
●
Select another track.
●
Replace the disc.
●
Replace it with another recordable disc.
●
Move the write protection tab back to its origi-
nal position.
●
Set this unit to the stand-by mode and wait for
a while.
●
Replace it with another disc.
●
Erase the disc and try recording again.
●
Replace it with another recordable disc.
●
Replace it with another recordable disc.
●
Erase the needless characters.
●
Replace it with another disc.
Meaning
●
Nothing is recorded.
(Neither music nor disc name is recorded.)
●
You tried to record from a copy prohibited CD.
●
The disc is damaged.
●
TOC information cannot be read.
●
MiniDisc not specified.
●
A track cannot be edited.
●
Recording cannot be performed correctly due
to vibration or shock in the unit.
●
The TOC information could not be created prop-
erly due to a mechanical shock or to scratches
on the disc.
●
The disc is out of recording space.
●
The CD tray is not working properly.
●
You chose 21 or more tracks for track editing.
●
There is no space to make CD editing on the
disc.
●
A MiniDisc is not working properly.
●
The number of characters for the disc name or
track name exceeds 40.
●
A MiniDisc has not been loaded.
●
The MiniDisc data cannot be read.
●
A CD has not been loaded.
●
The CD data cannot be read.
●
The data recorded on this disc is not audio data.
●
You tried to record on a playback-only disc.
●
The disc is write protected.
●
The temperature is too high.
●
TOC information recorded on the MD does not
match the MiniDisc specifications or it cannot
be read.
●
There is no space left for recording track num-
bers.
●
There is no space left for recording character
information.
●
The data contains an error.
●
MiniDisc not specified.
ERROR MESSAGES
Summary of Contents for CP-MX20
Page 42: ...MEMO ...
Page 43: ...MEMO ...
