Sharp CP-MX20 Operation Manual Download

Page: 35 / 44

■

Connecting external units

■

Headphones

Notes:

●

Before plugging in or unplugging the headphones, make sure the volume level is reduced.

●

Be sure your headphones have a 1/8" (3.5 mm) diameter plug and are between 16 ohms and 50 ohms impedance.
The recommended impedance is 32 ohms.

●

When headphones are connected, the speakers are disabled automatically.
Adjust the VOLUME control for the desired headphone volume.

USING EXTERNAL UNITS

Before connecting external units, set this unit to the stand-by mode and turn off the power to the external units.

The other MD/CD player

Commercially available cord
with 1/8" (3.5 mm) stereo
mini-plug and RCA plugs

T o t h e o u t p u t /
headphone jack

RIGHT

LEFT

To the analog
output jacks

LEFT

RIGHT

LEFT

●

Red plug

→

To RIGHT

●

White plug

→

To LEFT

Commercially available RCA cord

Summary of Contents for CP-MX20













































Search results

Summary of Contents for CP-MX20

Reviews:

Related manuals for CP-MX20

Brands by name

Popular brands

Sharp CP-MX20, Operation Manual

Search results

Summary of Contents for CP-MX20

Reviews:

Related manuals for CP-MX20

Brands by name

Popular brands