33
➁
Sleep timer setting
➀
Timer playback (record) setting
Timer playback
(record) start time
30 minutes - 2 hours
Desired time
Sleep operation will
automatically stop.
End time
To confirm the timer setting:
Press the TIMER/DELETE button once.
●
The turn-on time, the turn-off time will be displayed.
To cancel timer operation:
1
While in the timer stand-by mode, press the ON/STAND-
BY button to turn the power on.
2
Press the TIMER/DELETE button repeatedly to turn off
the timer, "
f
PLAY" or "
f
REC" will go out.
Caution:
In the following cases, the timer recording function will not
work.
●
When a MiniDisc has not been inserted.
●
When a playback-only MiniDisc is inserted.
●
When the MiniDisc you inserted is protected against acci-
dental erasure.
●
When there is no recording space left on the MiniDisc you
have inserted (when the "TOC FULL" or "DISC FULL"
message appears).
■
Sleep operation
The radio, CD and MiniDisc can all be turned off automati-
cally.
1
Play the desired sound source.
2
Press the SLEEP button.
SLEEP
●
If you do not need to change the time, the unit will enter
the sleep mode automatically.
3
Press the SLEEP button to select the time.
(Maximum: 2 hours - Minimum: 30 minutes)
The amount of sleep time can also be changed during the
sleep operation.
●
2 hours-30 minutes
→
30-minute intervals
SLEEP
4
The unit will enter the stand-by mode automatically
after the preset sleep time has elapsed.
To cancel the sleep operation:
Press the SLEEP button repeatedly. "0:00" will appear and
"SLEEP" will go out at the same time.
●
The sleep operation will be canceled.
To confirm the remaining sleep time:
Press the SLEEP button.
Notes:
●
Once the sleep time is set, it will remain the same duration
until the setting is changed.
●
The sleep functions of this unit cannot be used to control
equipment connected to this unit. You must use the sleep
functions of the other equipment, if it has them.
■
Simultaneous sleep and timer operation
1
Perform steps 1 - 9 on page 42, "Timer playback/Timer
recording".
2
Perform steps 1 - 3 of the "Sleep operation" on this page.
(Continued)
SLEEP
ON/
STAND-BY
Summary of Contents for CP-MX20
Page 42: ...MEMO ...
Page 43: ...MEMO ...
