Sharp CP-DV40, Operation Manual

Page: 56 / 64

E-55
ENGLISH
HT-DV40U
HT-DV50U
Advanced Features
Timer and sleep operation (Remote Control only) (continued)
4
Within 10 seconds, press the or button to select
“ONCE SET” or “DAILY SET”, and press the MEMORY/
DIMMER button.
5
Press the or button to adjust the hour and then
press the MEMORY/DIMMER button.
The illustrations show the timer playback setting in the daily
timer mode.
6
Press the or button to adjust the minutes and then
press the MEMORY/DIMMER button.
7
Set the time to finish as in steps 5 and 6 above.
8
Switch input with the or button, and then press the
MEMORY/DIMMER button.
To select the timer playback source: DVD/CD, USB, OPTICAL
1, OPTICAL 2, AUX IN or TUNER.
When you select the tuner, select a station by pressing the
or button, and then press the MEMORY/DIMMER
button.
If a station has not been programmed, “NO PRESET” will be
displayed and timer setting will be cancelled.
9
Adjust the volume using the VOLUME control, and then
press the MEMORY/DIMMER button.
Do not turn the volume up too high.
10
Press the ON/STAND-BY button to enter the power stand-
by mode.
The “TIMER” indicator lights up and the unit is ready for timer
playback.
11
When the preset time is reached, playback will start.
The volume will increase gradually until it reaches the preset
volume.
12
When the timer end time is reached, the system will enter
the power stand-by mode automatically.
Once timer:
The timer will be cancelled.
The “
r ” indicator will blink during timer playback.
Daily timer:
The timer will operate at the same time every day. It will
continue until the daily timer setting is cancelled. Cancel the
daily timer when it is not in use.
The “DAILY
r ” indicator will blink during timer playback.