Sharp CP-DV40, Operation Manual

Page: 17 / 64

E-16
ENGLISH
1
HT-DV40U
HT-DV50U
Preparation for Use
Installing the speakers
1
Horizontal position : Fix the pattern paper and fix two
screws into the wall with a distance of
160 mm (6-5/16") in between.
Vertical position : Fix the pattern paper and screws into
the wall.
2
Make a hole in the wall using a drill.
3
Fix a wall mount plug into the hole using a hammer, until it
is flush with the wall surface.
4
Fix screws into the wall for the speaker, as shown in
the illustration.
Make sure that the screw and the wall can support a
load of 20 kg (45 lbs).
Fix the screws, so the screw head extends about 5.5 mm
(7/32") from the wall.
) "
6
1 /
5 -
6 (
m
m
0
6
1
(Horizontal position) (Vertical position)
Pattern paper for
speaker
Pattern paper
for speaker
32 mm (1-1/4")
8 - 9 mm (3/8")
Wall surface
Wall mounting
screw
Wall surface
5.5 mm
(7/32")
1
Align the deco back cover to the hole on the speaker.
Fix them securely with the flush screw.
2
Tighten the screws and remove the paper. Hook the
speaker on the screw heads and make sure it is properly
secured.
Speaker box
Deco back
cover
Flush screw
(Horizontal position) (Vertical position)
Wall surface Wall surface
Speaker
wire
Speaker
wire