Sharp Conference Series XG-PH80W-N Operation Manual Download Page 57

Page: 57 / 84

Useful

Featur

Fan Mode Setting

This function changes the fan rotation speed.

Selectable

items

Description

Normal

Suitable for normal environments.

High

Set when using the projector at
altitudes of approximately 1,200 meters
(4,000 feet) or more.

When “Fan Mode” is set to “High”, the fan rotation
speeds up, and the fan noise becomes louder.

STANDBY Mode

When set to “Eco”, power consumption is
reduced in Standby mode.

Selectable

items

Description

Standard

The monitor output, LAN/RS232C and
Network functions are activated even if
the projector is in Standby mode.

Eco

The monitor output, LAN/RS232C and
Network functions are switched off in
Standby mode.

STANDBY Audio Out

You can set audio output from the AUDIO
OUTPUT terminal of the projector that is in
Standby mode.

Selectable

items

Description

The audio signal is output from the
AUDIO OUTPUT terminal in Standby
mode.

Off

The audio signal is not output from the
AUDIO OUTPUT terminal in Standby
mode.

When “Eco” is selected for “STANDBY Mode”,
“STANDBY Audio Out” is set to “Off”
automatically and you cannot change the
setting.

•

Note

Setting the Lamp Mode

This function allows you to select the usage of
the two lamps installed in the projector.

Selectable items

Description

Both Lamps

Both lamps are used for greater
brightness.

Lamp 1 Only

The lamp 1 is used.
When the lamp 1 burns out, the
lamp 2 automatically switches in
use.

Lamp 2 Only

The lamp 2 is used.
When the lamp 2 burns out, the
lamp 1 automatically switches in
use.

Equal Use

The lamp whose remaining life
time is the longer is used.

For lamp protection, this function is not
available for several minutes when changing
the lamp mode.

•

Note

Setting the Audio

You can set the following Audio items.

Selectable

items

Description

Volume

You can change the volume level.
The adjustable range is 0 to 60.

Speaker

The audio signal is output
from the internal speaker.

Off

The audio signal is not output
from the internal speaker.

The audio signal is not output from the speaker
of the projector when the audio cable is
connected to the audio output terminal and you
cannot change the setting.

•

Note

Using the Ex. Setting

Select

“

Ex. Setting

”

and then press

(ENTER)

to set

“

Fan Mode

”

“

STANDBY Mode

”

“

STANDBY

Audio Out

”

“

Filter Message

”

“

3D MODE

”

“

LAN/

RS232C

”

“

Network

”

Menu operation

Page

Summary of Contents for Conference Series XG-PH80W-N





















































































Search results

Summary of Contents for Conference Series XG-PH80W-N

Reviews:

Related manuals for Conference Series XG-PH80W-N

Brands by name

Popular brands

Sharp Conference Series XG-PH80W-N, Operation Manual

Search results

Summary of Contents for Conference Series XG-PH80W-N

Reviews:

Related manuals for Conference Series XG-PH80W-N

Brands by name

Popular brands