26/4/05
CD-SW200H(H)_EN.fm
E-43
CD-SW200H
TINSZA165AWZZ
ENGLISH
References
Maintenance
Cleaning the tape-handling parts
z
Dirty heads, capstans or pinch rollers can cause poor sound and
tape jams. Clean these parts with a cotton swab moistened with
commercial head/pinch roller cleaner or isopropyl alcohol.
z
When cleaning the heads, pinch rollers, etc., unplug the unit which
contains high voltages.
z
After long use, the deck's heads and capstans may become mag-
netised, causing poor sound. Demagnetize these parts once ev-
ery 30 hours of playing/recording time by using a commercial tape
head demagnetizer. Read the demagnetizer's instructions care-
fully before use.
Cleaning the cabinet
Periodically wipe the cabinet with a soft cloth and a diluted soap so-
lution, then with a dry cloth.
Caution:
z
Do not use chemicals for cleaning (gasoline, paint thinner, etc.). It
may damage the cabinet finish.
z
Do not apply oil to the inside of the unit. It may cause malfunc-
tions.
Specifications
As part of our policy of continuous improvement, SHARP reserves
the right to make design and specification changes for product im-
provement without prior notice. The performance specification fig-
ures indicated are nominal values of production units. There may be
some deviations from these values in individual units.
General
* This power consumption value is obtained when the demonstration
mode is cancelled in the power stand-by mode. Refer to page 9 to
cancel the demonstration mode.
Amplifier
Playback head
Erase head
Capstan
Recording/Playback head
Pinch roller
TAPE 1
TAPE 2
A
C
B
C
D
E
B
Power source
AC 230 V, 50 Hz
Power consumption
Power on: 200 W
Power stand-by: 0.6 W (*)
Dimensions
Width: 260 mm (10-1/4")
Height: 330 mm (13")
Depth: 326 mm (12-7/8")
Weight
10.4 kg (22.9 lbs.)
Output power
PMPO: 1520 W
Front Speaker:
MPO: 380 W (190 W + 190 W) (DIN 45 324)
RMS: 200 W (100 W + 100 W) (DIN 45 324)
RMS: 156 W (78 W + 78 W) (DIN 45 500)
Subwoofer:
MPO: 380 W (DIN 45 324)
RMS: 200 W (DIN 45 324)
RMS: 166 W (DIN 45 500)
Output terminals
Front Speakers: 6 ohms
Subwoofer: 12 ohms
Headphones: 16 - 50 ohms
(recommended: 32 ohms)
Video output: 1Vp-p
Input terminals
Game/ Auxiliary (audio signal):
500 mV/ 47 k ohms
Game/Video: 1Vp-p
