26/4/05
CD-SW200H(H)_EN.fm
E-10
CD-SW200H
TINSZA165AWZZ
8
1
2
3
4
5
6
7
ENGLISH
Preparation for Use
Remote control
Battery installation
Precautions for battery use:
z
Replace all old batteries with new ones at the same time.
z
Do not mix old and new batteries.
z
Remove the batteries if the unit will not be used for long periods
of time. This will prevent potential damage due to battery leakage.
Caution:
z
Do not use rechargeable batteries (nickel-cadmium battery, etc.).
z
Installing the batteries incorrectly may cause the unit to malfuc-
tion.
Battery removal:
Open the battery cover and pull up the battery to take out.
Notes concerning use:
z
Replace the batteries if the operating distance is reduced or if the
operation becomes erratic. Purchase 2 “AA” size batteries (UM/
SUM-3, R6, HP-7 or similar).
z
Periodically clean the transmitter on the remote control and the
sensor on the unit with a soft cloth.
z
Exposing the sensor on the unit to strong light may interfere with
operation. Change the lighting or the direction of the unit.
z
Keep the remote control away from moisture, heat, shock, and
vibrations.
Test of the remote control
Check the remote control after checking all the connections (see
pages 7 - 9).
Point the remote control directly at the remote sensor on the unit.
The remote control can be used within the range shown below:
Press the ON/STAND-BY button. Does the power turn on? Now, you
can enjoy music.
1 Open the battery cover.
2 Insert the supplied batteries according to the direction indi-
cated in the battery compartment (back of the battery cover).
When inserting or removing the batteries, push them toward the
battery terminals.
3 Close the battery cover.
Remote sensor
0.2 m - 6 m
(8” - 20’)
