E-27
ENGLISH
CD-MPX880H
Tape Recording
Recording on a cassette tape (continued)
To perform programmed recording:
To stop recording:
Press the (TAPE ) button.
The disc and tape will stop.
Recording from the radio
To interrupt recording:
Press the
button.
To resume recording, press the / (TAPE ) button.
To stop recording:
Press the (TAPE ) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the
AM loop aerial.
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the (TAPE ) button.
TAPE 1 and TAPE 2 will stop simultaneously.
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1 Programme discs and tracks (see page 17).
2 Press the
button.
3 Press the
/
(TAPE ) button to start recording.
1
Tune in to the desired station (see page 22).
2
Load a cassette into the TAPE 2 cassette compartment
with the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the
button.
Recording will be paused.
4
Press the / (TAPE ) button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette
compartment. Insert a blank
tape into the TAPE 2 cassette
compartment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1 2) button until “TAPE 1” appears on
the display.
4
Press the
button.
Recording will be paused.
5
Press the / (TAPE ) button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette
compartment with the side to be erased facing towards you.
2
Press the TAPE (1 2) button until “TAPE 2” appears on the
display.
3
Press the
button.
4
Press the
/
(TAPE ) button to start erasing.
TAPE 1
TAPE 2
CD
4
3
2
1
5
PRE
S
ET
TUNING
PRE
S
ET
TUNING
— VOL.
VOL.
PHONE
S
RECORD/P
LAYBACK
PLAYBACK
(PLAY & S
TOP)
Downloaded from
www.Manualslib.com
manuals search engine
Downloaded From Disc-Player.com Sharp Manuals
