10/3/05
MPX100EE_1.fm
26
TINSEA093AWZZ
CD-MPX100E
Tape Recording
Recording on a cassette tape (continued)
n
Recording from the radio
To interrupt recording:
Press the REC PAUSE (TAPE-2
) button.
To resume recording, press the / button.
To stop recording:
Press the button.
Note:
If you hear a whistling noise whilst recording an AM station, move
the AM loop aerial.
n
Dubbing from tape to tape
You can record from TAPE 1 to TAPE 2.
To stop dubbing:
Press the button.
TAPE 1 and TAPE 2 will simultaneously stop.
n
Erasing recorded tapes
Note:
Make sure that the TAPE 1 is not in use.
1
Tune in to the desired station. (See page 21.)
2
Load a cassette into the TAPE 2 cassette compartment with
the side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be
performed.
3
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
4
Press the / button to start recording.
1
Press the ON/STAND-BY button to turn the power on.
2
Load a prerecorded cassette
into the TAPE 1 cassette com-
partment. Insert a blank tape into
the TAPE 2 cassette compart-
ment.
It is recommended that the recording tape is the same length as
the master tape.
3
Press the TAPE (1 2) button until "TAPE 1" appears on
the display.
4
Press the REC PAUSE (TAPE-2
) button.
Recording will be paused.
5
Press the / button to start dubbing.
1
Load the tape to be erased into the TAPE 2 cassette compart-
ment with the side to be erased facing towards you.
2
Press the TAPE (1 2) button until "TAPE 2" appears on the
display.
3
Press the REC PAUSE (TAPE-2
) button.
4
Press the /
button to start erasing.
Downloaded from:
