1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
ENGLISH
CD-DD4500
T
ape Recording
–
Recording from the Radio
–
1
Tune in to the desired station (see page 19).
2
Load a cassette into the TAPE 2 cassette compartment with the
side to be recorded on facing you.
Wind past the leader of the tape, on which recording cannot be performed.
3
Press the REC PAUSE
I6
I6
I6
I6
I6
(
I6
I6
I6
I6
I6
) button.
Recording will be paused.
4
Press the
0/R
0/R
0/R
0/R
0/R
(
0
0
0
0
0
) button to start recording.
To interrupt recording:
Press the REC PAUSE
I6
(
I6
) button.
To resume recording, press
0/R
(
0
) button.
To stop recording:
Press the
■
(TAPE
■
) button.
Note:
If you hear a whistling noise whilst recording an AM station, move the AM loop aerial.
Recording from the Radio
Erase-prevention tab of cassette tapes:
●
When recording on a cassette tape, make sure
that the erase-prevention tabs are not re-
moved.
Cassettes have removable tabs that prevent
accidental recording or erasing.
●
To protect the recorded sound, remove the tab
after recording.
Cover the tab hole with adhesive tape to record
on the tape without the tab.
Side A
Tab for side A
Tab for side B
Recording can be operated in the TAPE 2 compartment. The TAPE 1 is for playback
only.
Listening to the Radio (See page 19.)
Before recording:
●
When recording important selections, make a preliminary test to ensure that the
desired material is properly recorded.
●
SHARP is not liable for damage or loss of your recording arising from malfunction of
this unit.
●
The volume and sound controls can be adjusted with no effect on the recorded
signal (Variable Sound Monitor).
●
For recording, use only normal tapes. Do not use metal and CrO
2
tapes.
E-22
http://www.usersmanualguide.com/
