5
OVEN DIAGRAM
OVEN:
1. Liquid crystal display
2. Control panel
3. Oven lamp
4. Door opening button
5. Waveguide cover (DO NOT REMOVE)
6. Bottom grill heating element
7. Turntable motor shaft
8. Oven cavity
9. Door seals and sealing surfaces
10. Door latches
11. Top grill heating element
12. Ventilation openings
13. Outer cabinet
14. Power cord
15. Menu label
ACCESSORIES:
16. Turntable
17. High rack
18. Low rack
• Place the turntable on to the turntable motor
shaft, ensuring it is located firmly.
• To avoid turntable damage, ensure dishes or
containers are lifted clear of the turntable rim
when removing them from the oven.
• The racks are for Grill, Mix, Convection and
recommended automatic operations.
Never touch the grills when they are hot.
NOTES:
• The waveguide cover is fragile. Care should be taken when cleaning inside the oven to ensure that it is not
damaged.
• After cooking fatty foods without a cover, always clean the cavity and especially the grill heating elements
thoroughly, these must be dry and free from grease. Built-up grease may overheat and begin to smoke or
catch fire.
• Always operate the oven with the turntable fitted correctly. This promotes thorough, even cooking.
A badly fitted turntable may rattle, may not rotate properly and could cause damage to the oven.
• The turntable rotates clockwise or anti-clockwise. The rotary direction may change each time you start the
oven. This does not affect cooking performance.
Warning:
The accessories will become very hot whenever the top heater, bottom heater or convection symbols are lighted
in the display and use thick oven mittens when inserting/removing the food or turntable from the oven to
PREVENT BURNS.
12
14
13
16
7
5
8
9
10
7
6
11
15
17
18
2
1
4
3
SCA/SCNZ R890N O/M,02-16
08.4.4, 1:28 PM
5
