E-6
• Press “SWING" button.
The "SWING" will be displayed and the louvres will
swing.
• To stop swing, repressing the “SWING” button.
The "SWING" will be disappeared.
• Press the MODE button to select the operation mode.
COOL mode
The set temperature must be lower than the room
temperature. If the set temperature is higher than the
room temperature, the unit will not produce cooling
effect, only the fan is active.
DRY mode
Fan moter will run at low fan speed in a specific
temperature range. The dehumidifying effect in this
mode is better than that in the COOL mode and it is
more energy saving.
HEAT mode
The set temperature must be higher than the room
temperature. If the set temperature is lower than the
room temperature, the heating function will not be
activated.
AUTO mode
The unit will adjust its operating mode automatically
according to the ambient temperature.
• In heating operation, the outdoor temperature is low
and the humidity is hight, frost will produce on the
outdoor unit. The heating efficiency will be reduced. In
this case, the unit will automatically start to defrost, and
the wire controller displays “DEFROST”.
Swing mode setting
Operation mode setting
COOL DRY FAN HEAT AUTO
WIRE CONTROLLER OPERATION
GREE_cassette_eng.indd 6
08.10.28 11:42:41 AM
