Sharp AY-XPC07PU, Service Manual

Page: 9 / 38

[2] Operation Manual
2 – 6
AY-XPC12PU
1
Press the HEAT, COOL , AUTO or DRY
button .
: HEAT : COOL
: AUTO : DRY
e green OPERATION lamp ( ) will t up.
TO TURN OFF
Press e STOP button.
e green OPERATION lamp ( ) will turn off.
2 Press the TEMPERATURE button to set
the desired temperature.
(HEAT/COOL/AUTO mode)
e temperature setting range:
61-86 °F (16-30 °C).
(DRY mode)
can be adjusted up to an addi-
tional ±3 °F (±2 °C) from e desired temperature
automatically by pressing e TEMPERATURE
button.
(Example: 1 °F / 1 °C )
(Example: 3 °F / 2 °C lower)
3 Press the FAN button to set the desired
fan speed.
In e DRY mode, e fan speed is preset to
AUTO and cannot be .
1
2
3
1
BASIC OPERATION
AUTO SOFT LOW
TURN OFF
NOTE:
TIPS ABOUT AUTO MODE
n e AUTO mode, e unit will automatically select COOL or HEAT mode by comparing e room
temperature and your desired temperature.
e unit will automatically switc between HEAT and COOL mode to keep e desired temperature.
COANDA and MULTI SPACE button will be inactivated during AUTO mode.
VERTICAL AIR FLOW DIRECTION
1 Press the SWING button ( ).
e vertical louver will swing.
2 Press the SWING button ( ) again
to stop at the desired position.
CAUTION:
Nevrs manually.
Manual adjustment of e louvers can cause
.
n e vertical adjustment louver is posi-
tioned at e lowest position in e COOL or
DRY mode for an extended period of time,
condensation may result.
NOTE:
e adjustment range is narrower n e
SWING range in order to prevent condensa-
tion from dripping.
HORIZONTAL AIR FLOW DIRECTION
ADJUSTING THE AIR FLOW
DIRECTION
1
2
HIGH
Louver link
Louver link