SELF CLEAN operation will reduce the
growth of mold fungus with Plasmacluster
ions and dry inside of the unit. Utilize the
operation at seasonal change over terms
.
1
Press the SELF CLEAN button when
the unit is not operating.
The remote control will display “
”.
(The
“
” will disappear automatically in
1 minute.)
The blue PLASMACLUSTER lamp (
)
will light up.
The unit will stop operation after 40 min-
utes.
TO CANCEL
Press the SELF CLEAN button.
The blue PLASMACLUSTER lamp will
turn off.
NOTE:
You cannot set the temperature, fan speed, air
direction or timer setting during the SELF
CLEAN operation.
Mold fungus already grown can not be
eliminated by this operation.
SELF CLEAN OPERATION
1
Press the DISPLAY button when the lamps
on the unit are too bright. (The green OP-
ERATION lamp and the orange TIMER
lamp cannot be turned off.)
1
During operation, press the DIS-
PLAY button.
The blue PLASMACLUSTER lamp (
)
,
5°F/-15°C AUTO OFF lamp
and/or the
green FULL POWER lamp (
) will turn
off.
TO LIGHT UP
Press the DISPLAY button again.
DISPLAY BUTTON
1
Use this mode when the remote control is
not available.
TO TURN ON
Press the AUX button.
The green OPERATION lamp (
) will light
up.
The mode and the temperature setting are
automatically selected according to the room
temperature and the outdoor temperature
when the unit is turned on. The fan speed is
set to AUTO.
TO TURN OFF
Press the AUX button again.
The green OPERATION lamp (
) will turn
off.
AUXILIARY MODE
2 – 10
AY-XPC12PU
AUX
Summary of Contents for AY-XPC07PU
Page 34: ...AY XPC12PU 2 1 INDOOR UNIT PARTS ...
Page 35: ...AY XPC12PU 3 ...
Page 36: ...4 AY XPC12PU ...