Sharp AR-M550U, Technical Manual, Page: 33 / 48

TEST SIMULATIONS
33
February 2005
Test
Command
Sub
Code
Description
18
Used to check the dial signal DTMF output in the fax dial
tone mode set by soft switch.
19
Used to back up data in the fax SRAM to the flash
memory (ARMM9 must be installed).
20 Used to read the back up data by SIM-19.
21
Used to print information related to fax communication
management.
22 Used to adjust the handset volume.
23 Used to download fax program.
24 Used to clear the fast memory data.
25 Used to register fax number for modem dial-in.
26
Used to register external telephone number s for modem
dial-in.
27 Used to register the transfer number for voice warp.
28 Used to record voice messages.
29 Used to clear data related to an address bbok.
30 Used to check the change in the TEL/LIU status.
31 Used to set on/off of each port to output to the TEL/LIU.
32 Used to check the receive data.
33
Used to check the signal busy/tone/cng/ced/fnet/dtmf
detection.
34
Used to measure the communication time of test image
data.
35 Modem program reloading.
36
Used to check interface between MFPC controller and
MDMC.
39 Used to set the destination specifications.
66
60 Used to set ACR data.
02 Printer Parallel I/F operation check.
11 Used to set printer I/F select in signal.
67
16 Used to check the operation of the network card.