manualshive.com logo in svg

Sharp AR-M550U, Technical Manual, Page: 22 / 48

Share
Download
Sharp AR-M550U Technical Manual Download Page 22

FIRMWARE UPGRADE 

 

 

 

22 

February 2005

 

 

Example shown: 

 

Updating AR-M700U via LPT1 (Centronics) with “u4.00.sfu” firmware file. 

 

 

 

Note:  

The PCU, Scanner, MFP control (Boot/Main) & Fax control (if installed) are all 
upgraded at the same time. 

 

11. Click 

Send File. 

 

The display will read:- 

 

Receiving Data               Writing Data            Result OK 

 

 

Caution:  

Do 

Not

 disconnect any cables, shut down the Dragon Update tool or Power 

off the machine, until 

Result OK 

is displayed.

 

 

12. When 

Result OK

 is displayed, you can confirm the upgrade process has been successful  

by using either one of the following methods:- 

 

a.  Use the Up/Down keys to ensure there is no display of 

Result NG.

 

 

b.  Power off the machine. Return ALL dipswitches on the MFP Control Pwb 

to “Normal” and enter Simulation 

22-05

 after turning on the main switch. 

 
Firmware Upgrade is complete 

 

Summary of Contents for AR-M550U

















































Reviews:

No comments