Sharp AR-M201, Operation Manual, Page: 22 / 96

20
3
Chapter 3
This chapter explains basic copying functions.
NORMAL COPYING
Using the document glass
1
Open the original cover/RSPF, and place the original face down
on the document glass.
[How to place the original]
Align the original with the original scale and the
centring (
) mark.
2
Gently close the original cover/RSPF.
By factory default, when a copy is made with
the original cover/RSPF cover open, the
function for preventing excessive toner use
activates and "CHECK ORIGINAL" appears
in the display. (See the "Check original
cover/RSPF open function" (p.14).)
3
Select the number of copies and any other copy settings, and
then press the [START] key (
).
Copying books or originals with folds or creases
Press down on the original cover/RSPF while
copying as shown. If the original cover/RSPF is not
completely closed, shadows may appear on the copy
or it may be fuzzy. Straighten originals that have
folds or creases before placing it on the document
glass.
• The document glass can scan up to 216 mm x 356 mm (8-1/2" x 14") original.
• When a copy is made, the edges will not be copied (image loss). For
the image loss, see the "SPECIFICATIONS" (p.82).
• To stop copying in the middle of a run, press the [CLEAR] key ( ).
• For the copy settings, see pages 23 through 35.
Note
mark
Original scale
Note
MAKING COPIES
!AR-M201.book 20 ページ ２００８年５月２２日 木曜日 午後１時４１分