Sharp AR-M201, Operation Manual, Page: 16 / 96

PREPARATIONS
14
Check original cover/RSPF open function
When enabled, this function may help prevent wasteful use of toner that occurs when
the original cover/RSPF cover is not completely closed.
If the start (
) key is pressed when the original cover/RSPF cover is not completely
closed, "CHECK ORIGINAL" will appear in the display and copying may not take
place. If copying does not take place, copying can be performed by pressing the start
(
) key again, however, the scan size set in "CHANGING A TRAY'S PAPER SIZE
SETTING" (p.19) or "VALID COPY WIDTH" (program number 25) (p.57) will be used.
If the original cover/RSPF cover is completely closed after "CHECK ORIGINAL"
appears, copying will take place at the normal size.
When this function is off, if the [Start] key ( ) is pressed to make a
copy with the RSPF cover open, parts outside of the original will be
copied black. Even when this function is on, if the [Start] key (
) is
pressed twice to make a copy with the RSPF cover open, parts outside
the original may be copied black. To prevent excessive use of toner,
make sure that the RSPF cover is closed when making a copy.
Note
!AR-M201.book 14 ページ ２００８年５月２２日 木曜日 午後１時４１分