Sharp AR-M150 Online, Operation Manual

Page: 85 / 116

TROUBLESHOOTING AND MAINTENANCE
83
8
(C) If the original does not move easily into the exit area, remove it in the
direction of the arrow while rotating the roller.
TONER CARTRIDGE REPLACEMENT
When toner is low, the error indicator will light up and "TONER CARTRIDGE IS
NEAR EMPTY." will appear in the display to alert you to purchase a new toner
cartridge. on purchasing a new toner cartridge. If copying is continued while the
indicator is lit, copies will gradually become lighter until the toner runs out. When the
toner runs out, the machine will stop operating, the error indicator will blink, and
"REPLACE THE TONER CARTRIDGE" will appear in the display. Follow the
procedure below to replace the toner cartridge.
"RETURN X ORIGINAL(S) START TO RESUME" will appear in the
display. Return the indicated number of pages to the document feeder
tray.
Open and close the SPF/RSPF to clear the error indicator, and
then return the required number of originals. Press the [START] key
(
) to resume copying.
• After the machine stops, it may be possible to make a few more
copies by taking the
toner
cartridge out of the machine, shaking it
horizontally, then reinstalling it. If copying is not possible after this
operation, replace the
toner
cartridge.
• During a long copy run of a dark original, "TONER
REPLENISHMENT IN PROGRESS" appears in the display, and the
machine may stop even though toner is left. The machine will feed
toner up to 2 minutes and then the ready indicator will light up. Press
the [START] key (
) to resume copying.
Note
Note