Sharp AR-FX9 - Fax Interface Card Operation Manual Download | Manualshive

Page: 2 / 104

background image

Caution

• Use only the line cable that was provided with the machine.
• To reduce the risk of fire, use only UL-Listed No.26 AWG or larger

telecommunication line cord.

Note

• This manual (fax function) describes the AR-168S/AR-168D model with

optional facsimile expansion kit (AR-FX9) installed. Depending on the
model you have and on the options installed, some of the illustrations in this
manual may be different, however, the basic operations are the same.

• This manual describes how to use the fax function of the machine.

Part names and functions shared with the copy function (for example, the
misfeed indicator and add paper indicator), are described in the Operation
Manual. For more information, please read the Operation Manual.

• This operation manual refers to the Single Pass Feeder as the "SPF", and

the Reversing Single Pass Feeder as the "RSPF".

For users in the USA

This device complies with Part 15 of the FCC rules. Operation is subject to the
following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

WARNING:

FCC Regulations state that any unauthorized changes or modifications to this
equipment not expressly approved by the manufacturer could void the user’s
authority to operate this equipment.

Note:
This equipment has been tested and found to comply with the limits for a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are
designed to provide reasonable protection against harmful interference in a
residential installation. This equipment generates, uses and can radiate radio
frequency energy and, if not installed and used in accordance with the
instructions, may cause harmful interference to radio communications.
However, there is no guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and
on, the user is encouraged to try to correct the interference by one or more of
the following measures:

Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected.
Consult the dealer or an experienced radio/TV technician for help.

●
●
●

●

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠♠

♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠♠♠♠♠♠♠♠♠♠♠♠

♠♠

♠

«
1
2
3
4
...
»

Summary of Contents for AR-FX9 - Fax Interface Card









































































































Reviews:

No comments

Related manuals for AR-FX9 - Fax Interface Card

All in One Printer

Brand: Xerox Pages: 3

VarioPrint 6000 MICR series

Brand: Oce Pages: 264

Brand: Oce Pages: 194

WORKCENTRE 5050

Brand: Xerox Pages: 186

T2150 SprintPro

Brand: Tally Pages: 124

Brand: Konica Minolta Pages: 846

Compa II Series

Brand: Valentin Pages: 110

Brand: Swift Pages: 14

WorkCentre 7328

Brand: Xerox Pages: 8

Brand: Xerox Pages: 233

Brand: Delta OHM Pages: 28

ThermalTronix TT-1025EX-MIL

Brand: Intellisystem Pages: 11

DURA PRINTER SI600

Brand: Nitto Denko Pages: 174

Brand: Ricoh Pages: 12

4400B - Phaser B/W Laser Printer

Brand: Xerox Pages: 24

Brand: Riso Pages: 66

Brand: Lexmark Pages: 8

Brand: Tachosys Pages: 5

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands