manualshive.com logo in svg

Sharp AR-FX12, Service Manual, Page: 6 / 122

Share
Download
Sharp AR-FX12 Service Manual Download Page 6

AR-FX12 EXTERNAL VIEWS AND INTERNAL STRUCTURES 4-1

[4] EXTERNAL VIEWS AND INTERNAL STRUCTURES

1. Operation panel

1 Touch panel 

(following page)

• Messages and keys appear in the touch panel. Touch the displayed keys to select functions and enter settings.

• When a key in the touch panel is touched, a beep sounds and the key is highlighted.

• Keys that cannot be selected in a screen are grayed out. If touched, a double-beep will sound to alert you that the key cannot

be selected.

2 Mode select keys

Use these keys to change modes.

3 [IMAGE SEND] 

key

Press to switch to fax mode. The main screen of fax mode will appear. The screen that appears when this key is selected can 
be changed with "Default display settings" in the key operator programs.

4 Numeric keys

Use to enter fax numbers, sub-addresses, passcodes, and numerical settings.

5 [C] key (clear key) Use to clear a mistake when entering fax numbers, sub-addresses, passcodes, and numerical settings. One digit is cleared 

each time you press the key.When an original is being scanned, this key can also be used to cancel scanning.

6 [CA]  key

(clear all key)

Use to cancel a transmission or programming operation. When this key is pressed, the operation is canceled and you return to 
the main screen described on the following page. This key is also used to cancel resolution, paper size and special mode 
settings.

7 [

] key

This is used to produce tone signals when you are on a pulse dial line.

8 [START] key

Press to begin scanning an original for fax transmission.

Model

Key name

Description in this manual

AR-M355N/
AR-M455N

Described in the configuration where the
optional fax expansion kit (AR-FX12) is
installed on the AR-M355N/AR-M455N models.

No functions related to document filing or
Internet fax reception are described in this
manual.

AR-M355U/
AR-M455U

[04]ETERNALVIEWS.fm  1 

ページ

  

２００４年１０月２６日　火曜日　午後３時４２分

Summary of Contents for AR-FX12



























































































































Reviews:

No comments