Sharp AR-FX12 Service Manual Download Page 19

Page: 19 / 122

AR-FX12 SIMULATIONS, FAX SOFTWARE SWITCH 6-7

<List of set values 1>

<List of display values 1>

<List of set values 2>

For the above +20, the machine enters the duplex mode (DS), making
duplex copy.

<List of set values 3>

46-13

Purpose

Adjustment

Function (Content)

Used to adjust the reading density in the FAX
mode (Standard mode).
(Only when FAX is installed.)

Section
Item

Picture quality

Operation/Procedure The exposure mode to be set is selected.

(FAX Standard mode individual adjustment)

1) The current set value is highlighted on the

right side of each item. In this screen, be sure
to select "1: PRINT START." (Set value: 1)

2) Set the exposure level with 10 digit key pad.

Press P to store the set value.
(Default: 50, set range: 0 - 99)

3) Press START, and copying is started and the

set value is stored. (Display value 1)

4) Select a paper feed tray. (Set value 2)
5) Select an exposure level. (Set value 3)

SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). SELECT 0-8, AND PRESS START.
0. TRAY SELECT 1. PRINT START
2. EXP LEVEL
3. AUTO

4. 1.0

5. 2.0

6. 3.0

7. 4.0

8. 5.0

SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL),INPUT VALUE 0-99, AND PRESS START.
4. 1.0

SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). SELECT 1-5, AND PRESS START.
(FEED TRAY)
1. TRAY1 2. TRAY2 3. TRAY3 4. TRAY4
5. BPT
(ABOVE +20: DSPF MODE)

SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). NOW PRINTING.

SIMULATION 46-13
EXP. LEVEL SETUP FAX(NORMAL). SELECT 3-8, AND PRESS START.
(EXP. LEVEL SELECT)
3. AUTO

4. 1.0

5. 2.0

6. 3.0

7. 4.0

8. 5.0

Select other than 0 - 2,
and press [START] key.

Select 1, and
press [START] key.

Select 2, and
press [START] key.

Select 0, and
press [START] key.

Press [START] key.

Press [CUSTOM SETTINGS] key

Or copying is terminated.

Press [CUSTOM SETTINGS] key

Press [START] key or

Press [CUSTOM SETTINGS] key

Press [START] key or

Paper feed tray selection

Print start (Default)

Exposure level selection

Auto

Exposure level 1

Exposure level 2

Exposure level 3

Exposure level 4

Exposure level 5

Normal display

“NOW PRINTING”

ERROR display

DOOR OPEN.
JAM
PAPER EMPTY.

TRAY1

TRAY2

TRAY3

TRAY4

Manual feed

Auto

Exposure level 1

Exposure level 2

Exposure level 3

Exposure level 4

Exposure level 5

[06]SIMULATIONS

･

FAXSOFTWARESWITCH.fm 7

ページ

２００４年１０月２６日　火曜日　午後３時４４分

Summary of Contents for AR-FX12



























































































































Search results

Summary of Contents for AR-FX12

Reviews:

Sharp AR-FX12, Service Manual, Page: 19 / 122

Search results

Summary of Contents for AR-FX12

Reviews: