Sharp AR-C360P, Service Manual

Page: 90 / 180

Rev. 1
90 /
5. ADJUSTMENT
Adjust the
AR-C360P
by key input from the operation panel.
The
AR-C360P
comes with a Maintenance Menu in the usual menu. Select the menu according to the
items to adjust and the purpose of adjustment.
5.0 System Maintenance Menu
This menu is launched by turning on the power source while keeping the [Menu+]+[Menu-]+[Help]
switches pressed.
The menu display is only available in English regardless of destination.
This menu can be modified according to the destination, etc. Therefore, it is not open
(closed) to the end user.
Note
Value
O DA
OEL
APS
JP1
JPOEM1
OEMA
OEMI
NEXT
Enable
Disable
Enable
Disable
NEXT
Item
USER
Maintenance
Menu
Maintenance
Print Menu
Print Page
Count
Personality
Diagnostic
Mode
Category
System
Maintenance
Function
Set the destination.
JPOEM1: Japan OEM
OEMA: A4 Default Overseas OEM
OEML : Letter Default Overseas OEM
Automatically reboot after escaping
from the menu.
The default value for non-PS
models is JP1.
This displays the menu to initialize
the harddisk and Flash ROM.
This switches whether to Show/Hide
the Print Information — ID Check
Pattern and Engine Status of the
Function Menu. If this item is
disabled, the Print Information —
ID Check Pattern and Engine
Status of the Function Menu is
never displayed.
The printer is restarted after the
settings are modified and escaping
from the menu.
This sets whether to Show/Hide the
display of the "Functions"-
"Configuration" - "Print Page
Count"-"Total Page".
This displays the menu to edit the
default PDL language supported
according to destination.
This goes to the engine s self-
diagnosis mode.
Old Menu
"SYSTEM
MAINTENANCE
MENU" -
"OKIUSER" -
"OKIUSER"
"SYSTEM
MAINTENANCE
MENU" - "PAGE
CNT PRINT" -
"PAGE CNT PRINT"
"SYSTEM
MAINTENANCE
MENU"-
"DIAGNOSTIC
MODE XX.XX"
DF
*
*
*
Valid
RB
ET
ET
ET
Save
-
-
-
-
Table 5-0. Maintenance Menu Display Table (1/2)