Sharp AR-C260P, Operation Manual

Page: 48 / 78

TROUBLESHOOTING
2-30
Smudges on printed
sheets Does a message appear indicating the
need for maintenance?
Please contact your dealer as soon as possible.
Colour deviations
occur. When printing in colour, text and colour
deviations appear. Perform colour registration as explained on
pages 9 and 10 of the key operator's guide.
The displayed paper
size differs from the
loaded paper size.
The tray's paper size slide is not set to
the correct size for the paper in the tray.
When you change the paper size in the tray, be
sure to adjust the paper size slide on the tray to
the new paper size. (page 2-3)
When printing on an
"extra" size of
paper, part of the
printed image is
missing.
The paper size slide in the tray is set to
"extra", however, the correct paper size
is not specified in the paper tray settings
of the custom settings.
Specify the correct paper size in the paper tray
settings of the custom settings (see pages 2-12
to 2-13). If the paper size setting is not correct,
part or all of the image may not print (this
depends on the options installed).
When printing on a
non-standard size
of paper using the
bypass tray, part of
the printed image is
missing.
The paper size setting for the bypass
tray is not correct.
Set the correct paper size as explained on pages
2-14 to 2-16. If the paper size setting is not
correct, part or all of the image may not print (this
depends on the options installed).
Paper misfeeds
frequently.
Is paper other than
SHARP-recommended paper being
used?
Use SHARP-recommended paper. (pages 2-10
and 2-22)
Paper curled or damp?
Do not use curled or crimped paper. If you are
not going to use paper for a long time, store the
paper in the wrapper in a dry location.
Is the paper curled and does it
frequently misfeed in the duplex
module/2 x 500 sheet paper drawer or
saddle stitch finisher?
Some types of paper may curl inside the
machine. Turning the paper over in the tray may
help reduce misfeeding due to curling.
Multiple sheets of paper fed
simultaneously?
Remove the paper
from the paper tray
or the bypass tray,
fan the paper as
shown in the
illustration, and
then load it again.
Printed paper is
wrinkled or the
image rubs off
easily.
Is paper other than
SHARP-recommended paper being
used?
Use SHARP-recommended paper. (pages 2-10
and 2-22)
Is paper size or weight outside of the
permitted range?
Use paper in the permitted range.
Do wrinkles appear when printing
envelopes?
Moving the pressure adjusting levers of the
fusing unit from the normal position to a weaker
pressure position may help alleviate this
problem. (page 2-6)
Is the pressure adjustment lever of the
fusing unit out of position? Return the pressure adjusting levers of the
fusing unit to the normal position. (page 2-7)
Paper damp?
Be sure to store paper in the wrapper in a dry
location. Do not store paper in a location that is:
●
humid
●
extremely hot or cold.
Problem Check Solution or cause